There is currently a growing demand for more effective thermal insulation materials with the best performance properties. This research paper presents the investigation results on the influence of two types of filler on the structure and properties of rigid polyurethane foam composites. Fly ash as a product of coal combustion in power plants and microspheres of 5, 10, 15, and 20 wt.%, were used as rigid polyurethane foams modifiers. The results of thermal analysis, mechanical properties testing, and cellular structure investigation performed for polyurethane composites show that the addition of fly ash, up to 10 wt.%, significantly improved the majority of the tested parameters. The use of up to 20 wt.% of microspheres improves the mechanical and thermal properties and thermal stability of rigid polyurethane foams.
Polymer substrates obtained from poly(lactic acid) (PLA) nanofibres modified with carbon nanotubes (CNTs) and gelatin (GEL) for cartilage tissue engineering are studied. The work presents the results of physical, mechanical, and biological assessment. The hybrid structure of PLA and gelatine nanofibres, carbon nanotubes- (CNTs-) modified PLA nanofibres, and pure PLA-based nanofibres was manufactured in the form of fibrous membranes. The fibrous samples with different microstructures were obtained by electrospinning method. Microstructure, physical and mechanical properties of samples made from pure PLA nanofibres, CNTs-, and gelatin-modified PLA-nanofibres were studied. The scaffolds were also testedin vitroin cell culture of human chondrocytes collected from patients. To assess the influence of the nanofibrous scaffolds upon chondrocytes, tests for cytotoxicity and genotoxicity were performed. The work reveals that the nanofibrous structures studied were neither genotoxic nor cytotoxic, and their microstructure, physical and mechanical properties create promising scaffolds for potential use in cartilage repairing.
The aim of the work was to compare the degradation behavior of electrospun nanofibres obtained from pure poly(lactic acid) (PLA) and modified with carbon nanotubes (CNTs) in aqueous environment. The nanofibres in the form of mats were manufactured using the electrospinning technique (ES) with potential biomedical application. To investigate the degradation behavior, onecomponent and composite (containing CNTs) nanofibres were compared using scanning electron microscopy (SEM), water contact angle measurements, differential scanning calorimetry (DSC), and mechanical testing. The changes in their morphology, structure, and selected physical and mechanical properties during incubation up to 14 days were analysed. Two types of CNTs differing in concentration of surface functional groups were used to modify the PLA nanofibres. PLA and composite nanofibres (PLA + CNT) during incubation underwent swelling and partial degradation due to the penetration of water into polymer matrix. Changes in the mechanical properties of composite mats were higher than those observed for pure PLA mats. After 14-day incubation, samples retained from 47 to 78% of their initial tensile strength, higher for PLA samples. Morphological changes in pure PLA nanofibres were more dynamic than in composite nanofibres. No significant changes in crystallinity, wettability, and porosity of the samples occurred.
The aim of the study was to manufacture poly(lactic acid)-(PLA-) based nanofibrous nonwovens that were modified using two types of modifiers, namely, gelatin-(GEL-) based nanofibres and carbon nanotubes (CNT). Hybrid nonwovens consisting of PLA and GEL nanofibres (PLA/GEL), as well as CNT-modified PLA nanofibres with GEL nanofibres (PLA + CNT/GEL), in the form of mats, were manufactured using concurrent-electrospinning technique (co-ES). The ability of such hybrid structures as potential scaffolds for tissue engineering was studied. Both types of hybrid samples and one-component PLA and CNTs-modified PLA mats were investigated using scanning electron microscopy (SEM), water contact angle measurements, and biological and mechanical tests. The morphology, microstructure, and selected properties of the materials were analyzed. Biocompatibility and bioactivity in contact with normal human osteoblasts (NHOst) were studied. The coelectrospun PLA and GEL nanofibres retained their structures in hybrid samples. Both types of hybrid nonwovens were not cytotoxic and showed better osteoinductivity in comparison to scaffolds made from pure PLA. These samples also showed significantly reduced hydrophobicity compared to one-component PLA nonwovens. The CNT-contained PLA nanofibres improved mechanical properties of hybrid samples and such a 3D system appears to be interesting for potential application as a tissue engineering scaffold.
The aim of the article is to compare two types of fly ash (from the fluidized and pulverized coal combustion process) as a filler for rigid polyurethane foam. Pulverized fly ash (PFA) is widely used in building materials, while fluidized fly ash (FFA) is not currently recycled, but landfilled. The produced rigid polyurethane foams were reinforced with 5 and 10% by weight addition of fly ash from two different types of boilers. The foaming process, physical properties, morphologies and thermal degradation were subject to comparative analysis. The research indicated that fly ash intensifies the reactions of foam synthesis, most commonly, polyurethane (PU) foam with an addition of 10% PFA. What is interesting is that both ashes can be used in PU foam technology as they do not cause deterioration of the physical parameters. As shown, the addition of filler affects the morphology and impairs the brittleness. Additionally, the use of fly ash from coal combustion in the technology of polyurethane materials complies with the guidelines of the circular economy stated in the European Union legislation. Partial replacement of petrochemical components with waste filler also reduces the total energy consumption in the production of PU composites.
Microspheres used in our work were acquired from one of Kazakhstan coal-fueled power plant. The size of the microspheres varied between 45 and 400 μm, the median particle size (D50) was 158 μm. Microscopic analysis revealed that the material consisted mainly of cenospheres. The results of elemental and oxide analysis showed that microspheres were composed of aluminosilicates. Identified crystalline phases were mullite (approx. 12 %) and trace amount of quartz (silica). Microscopic observations of the cross-sectional surface of both unmodified PUR foam and foams modified with microspheres showed a well formed, cellular structure of all materials. The observed cells are polyhedron in shape, most of them are closed, microspheres were uniformly distributed within polymer matrix and placed between cells. The apparent densities calculations of the samples showed that when microspheres were added to the polymer matrix, apparent density of the resulting composite materials increased. The results of elemental analysis pointed out the highest content of all three elements in unmodified PUR foam sample. The addition of the microspheres to the system resulted in decrease of the concentration of all three elements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.