In the tofu production process, UD XYZ is inseparable from the risks that may occur so that it can interfere with tofu production activities. Therefore, to handle the existing risks, it is necessary to carry out risk management by mitigating risks. Data collection techniques used are secondary data and primary data.The data processing technique and data analysis used the Failure Mode Effect Analysis (FMEA) method and the Analytical Hierarchy Process (AHP) method. The results of data processing using the FMEA method are known to be risk factors for raw materials with the highest RPN value, namely the risk of poor soybean quality with an RPN value of 720, the risk factor for the highest RPN production process is the risk of the dose of supporting raw materials not in accordance with the RPN value of 320, and the highest RPN finished product risk factor is the risk of damaged tofu when packaged with an RPN value of 36. The results of data processing using the AHP method with the help of Benefit, Cost, Opportunities, and Risk (BCOR) criteria are known that the criteria with values the highest is the benefit criteria with a value of 0.600. In the risk of raw materials, namely the quality of soybeans is not good, it is known that the chosen alternative strategy is to use the best raw material supplier with a value of 0.738. In the risk of the production process, namely the dose of supporting raw materials is not appropriate, it is known that the chosen alternative strategy is to make a Standard Operating Procedure (SOP) with a value of 0.671. The existence of SOPs will help to achieve goals because of the design that guides employees in carrying out their duties and to minimize errors when carrying out their respective tasks.