<span>The use of the internet of things (IoT) in solar photovoltaic (PV) systems is a critical feature for remote monitoring, supervising, and performance evaluation. Furthermore, it improves the long-term viability, consistency, efficiency, and system maintenance of energy production. However, previous researchers' proposed PV monitoring systems are relatively complex and expensive. Furthermore, the existing systems do not have any backup data, which means that the acquired data could be lost if the network connection fails. This paper presents a simple and low-cost IoT-based PV parameter monitoring system, with additional backup data stored on a microSD card. A NodeMCU ESP8266 development board is chosen as the main controller because it is a system-on-chip (SOC) microcontroller with integrated Wi-Fi and low-power support, all in one chip to reduce the cost of the proposed system. The solar irradiance, ambient temperature, PV output voltage and PV output current, are measured with photo-diodes, DHT22, impedance dividers and ACS712. While, the PV output power is a product of the PV voltage and PV current. ThingSpeak, an open-source software, is used as a cloud database and data monitoring tool in the form of interactive graphics. The results showed that the system was designed to be highly accurate, reliable, simple to use, and low-cost.</span>
<p>Harvesting solar energy as a renewable energy source has received significant attention through serious studies that could be applied massively. However, the nonlinear nature of photovoltaic (PV) concerning the surrounding environment, especially irradiation and temperature, affects the resulting output. Therefore, the correlation between environmental parameters and PV's energy needs to be studied. This paper presents a design for measuring solar PV parameters monitored on a laboratory scale. The monitoring is based on internet of things (IoT) technology analyzed in realtime. The system was tested in various weather conditions for 18 hours. The results obtained indicate that the output voltage was influenced by the lighting factor of the PV and the surrounding temperature.</p>
Several maximum power point (MPP) tracking algorithms for solar power or photovoltaic (PV) systems concerning partial-shading conditions have been studied and reviewed using conventional or advanced methods. The standard MPPT algorithms for partial-shading conditions are: (i) conventional; (ii) mathematics-based; (iii) artificial intelligence; (iv) metaheuristic. The main problems of the conventional methods are poor power harvesting and low efficiency due to many local maximum appearances and difficulty in determining the global maximum tracking. This paper presents MPPT algorithms for partial-shading conditions, mainly metaheuristics algorithms. Firstly, the four classification algorithms will be reviewed. Secondly, an in-depth review of the metaheuristic algorithms is presented. Remarkably, 40 metaheuristic algorithms are classified into four classes for a more detailed discussion; physics-based, biology-based, sociology-based, and human behavior-based are presented and evaluated comprehensively. Furthermore, the performance comparison of the 40 metaheuristic algorithms in terms of complexity level, converter type, sensor requirement, steady-state oscillation, tracking capability, cost, and grid connection are synthesized. Generally, readers can choose the most appropriate algorithms according to application necessities and system conditions. This study can be considered a valuable reference for in-depth works on current related issues.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.