Here we adapt and evaluate a full-face snorkel mask for use as personal protective equipment (PPE) for health care workers, who lack appropriate alternatives during the COVID-19 crisis in the spring of 2020. The design (referred to as Pneumask) consists of a custom snorkel-specific adapter that couples the snorkel-port of the mask to a rated filter (either a medical-grade ventilator inline filter or an industrial filter). This design has been tested for the sealing capability of the mask, filter performance, CO2 buildup and clinical usability. These tests found the Pneumask capable of forming a seal that exceeds the standards required for half-face respirators or N95 respirators. Filter testing indicates a range of options with varying performance depending on the quality of filter selected, but with typical filter performance exceeding or comparable to the N95 standard. CO2 buildup was found to be roughly equivalent to levels found in half-face elastomeric respirators in literature. Clinical usability tests indicate sufficient visibility and, while speaking is somewhat muffled, this can be addressed via amplification (Bluetooth voice relay to cell phone speakers through an app) in noisy environments. We present guidance on the assembly, usage (donning and doffing) and decontamination protocols. The benefit of the Pneumask as PPE is that it is reusable for longer periods than typical disposable N95 respirators, as the snorkel mask can withstand rigorous decontamination protocols (that are standard to regular elastomeric respirators). With the dire worldwide shortage of PPE for medical personnel, our conclusions on the performance and efficacy of Pneumask as an N95-alternative technology are cautiously optimistic.Key points: Full-face snorkel masks are adapted for use as Personal Protective Equipment during the COVID-19 crisis, using a custom adapter that facilitates the attachment of inline medical-grade respiratory filters or NIOSH industrial respirator filters. This solution was designed as a reusable stopgap solution for healthcare workers to help address the short-term global N95 respirator shortage.
Here we adapt and evaluate a full-face snorkel mask for use as personal protective equipment (PPE) for health care workers, who lack appropriate alternatives during the COVID-19 crisis in the spring of 2020. The design (referred to as Pneumask) consists of a custom snorkel-specific adapter that couples the snorkel-port of the mask to a rated filter (either a medical-grade ventilator inline filter or an industrial filter). This design has been tested for the sealing capability of the mask, filter performance, CO2 buildup and clinical usability. These tests found the Pneumask capable of forming a seal that exceeds the standards required for half-face respirators or N95 respirators. Filter testing indicates a range of options with varying performance depending on the quality of filter selected, but with typical filter performance exceeding or comparable to the N95 standard. CO2 buildup was found to be roughly equivalent to levels found in half-face elastomeric respirators in literature. Clinical usability tests indicate sufficient visibility and, while speaking is somewhat muffled, this can be addressed via amplification (Bluetooth voice relay to cell phone speakers through an app) in noisy environments. We present guidance on the assembly, usage (donning and doffing) and decontamination protocols. The benefit of the Pneumask as PPE is that it is reusable for longer periods than typical disposable N95 respirators, as the snorkel mask can withstand rigorous decontamination protocols (that are standard to regular elastomeric respirators). With the dire worldwide shortage of PPE for medical personnel, our conclusions on the performance and efficacy of Pneumask as an N95-alternative technology are cautiously optimistic.
Centralized manufacturing and global supply chains have emerged as an efficient strategy for large-scale production of goods throughout the 20th century. However, while this system of production is highly efficient, it is not resilient. The COVID-19 pandemic has seen numerous supply chains fail to adapt to sudden changes in supply and demand, including those for goods critical to the pandemic response such as personal protective equipment. Here, we consider the production of the non-woven polypropylene filtration media used in face filtering respirators (FFRs). The FFR supply chain’s reliance on non-woven media sourced from large, centralized manufacturing facilities led to a supply chain failure. In this study, we present an alternative manufacturing strategy that allows us to move towards a more distributed manufacturing practice that is both scalable and robust. Specifically, we demonstrate that a fiber production technique known as centrifugal melt spinning can be implemented with modified, commercially-available cotton candy machines to produce nano- and microscale non-woven fibers. We evaluate several post processing strategies to transform the produced material into viable filtration media and then characterize these materials by measuring filtration efficiency and breathability, comparing them against equivalent materials used in commercially-available FFRs. Additionally, we demonstrate that waste plastic can be processed with this technique, enabling the development of distributed recycling strategies to address the growing plastic waste crisis. Since this method can be employed at small scales, it allows for the development of an adaptable and rapidly deployable distributed manufacturing network for non-woven materials that is financially accessible to more people than is currently possible.
The surge of COVID-19 cases in India and around the world has resulted in acute oxygen shortage. Oxygen therapy through nasal cannula with flow rates of 1-6 L/min is an effective treatment for many COVID-19 patients in non-critical conditions and may help prevent disease progression. The same treatment is also used in post-acute care for recovering COVID-19 patients. Here we describe a simple, open source, and rapidly manufacturable oxygen conservation device for use with dual-port nasal cannula that can extend the life of current oxygen supply by almost two to three times, which we hope will help towards coping with the ongoing crisis. We estimate the bill of materials cost to be under $50 for manufacturing in bulk.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.