Summary1. Allometric equations are currently used to estimate above-ground biomass (AGB) based on the indirect relationship with tree parameters. Terrestrial laser scanning (TLS) can measure the canopy structure in 3D with high detail. In this study, we develop an approach to estimate AGB from TLS data, which does not need any prior information about allometry. We compare these estimates against destructively harvested AGB estimates and AGB derived from allometric equations. We also evaluate tree parameters, diameter at breast height (DBH) and tree height, estimated from traditional field inventory and TLS data. 2. Tree height, DBH and AGB data are collected through traditional forest inventory, TLS and destructive sampling of 65 trees in a native Eucalypt Open Forest in Victoria, Australia. Single trees are extracted from the TLS data and quantitative structure models are used to estimate the tree volume directly from the point cloud data. AGB is inferred from these volumes and basic density information and is then compared with the estimates derived from allometric equations and destructive sampling. 3. AGB estimates derived from TLS show a high agreement with the reference values from destructive sampling, with a concordance correlation coefficient (CCC) of 0Á98. The agreement between AGB estimates from allometric equations and the reference is lower (CCC = 0Á68-0Á78). Our TLS approach shows a total AGB overestimation of 9Á68% compared to an underestimation of 36Á57-29Á85% for the allometric equations. 4. The error for AGB estimates using allometric equations increases exponentially with increasing DBH, whereas the error for AGB estimates from TLS is not dependent on DBH. The TLS method does not rely on indirect relationships with tree parameters or calibration data and shows better agreement with the reference data compared to estimates from allometric equations. Using 3D data also enables us to look at the height distributions of AGB, and we demonstrate that 80% of the AGB at plot level is located in the lower 60% of the trees for a Eucalypt Open Forest. This method can be applied in many forest types and can assist in the calibration and validation of broad-scale biomass maps.

No abstract

Abstract1. Tropical forest biomass is a crucial component of global carbon emission estimations. However, calibration and validation of such estimates require accurate and effective methods to estimate in situ above-ground biomass (AGB). Present methods rely on allometric models that are highly uncertain for large tropical trees. Terrestrial laser scanning (TLS) tree modelling has demonstrated to be more accurate than these models to infer forest AGB. Nevertheless, applying TLS methods on tropical large trees is still challenging. We propose a method to estimate AGB of large tropical trees by three-dimensional (3D) tree modelling of TLS point clouds.2. Twenty-nine plots were scanned with a TLS in three study sites (Peru, Indonesia and Guyana). We identified the largest tree per plot (mean diameter at breast height of 73.5 cm), extracted its point cloud and calculated its volume by 3D modelling its structure using quantitative structure models (QSM) and converted to AGB using species-specific wood density. We also estimated AGB using pantropical and local allometric models. To assess the accuracy of our and allometric methods, we harvest the trees and took destructive measurements. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

1. Leaf and wood separation is a key step to allow a new range of estimates from Terrestrial LiDAR data, such as quantifying above-ground biomass, leaf and wood area and their 3D spatial distributions. We present a new method to separate leaf and wood from single tree point clouds automatically. Our approach combines unsupervised classification of geometric features and shortest path analysis.2. The automated separation algorithm and its intermediate steps are presented and validated. Validation consisted of using a testing framework with synthetic point clouds, simulated using ray-tracing and 3D tree models and 10 field scanned tree point clouds. To evaluate results we calculated accuracy, kappa coefficient and F-score.3. Validation using simulated data resulted in an overall accuracy of 0.83, ranging from 0.71 to 0.94. Per tree average accuracy from synthetic data ranged from 0.77 to 0.89. Field data results presented and overall average accuracy of 0.89. Analysis of each step showed accuracy ranging from 0.75 to 0.98. F-scores from both simulated and field data were similar, with scores from leaf usually higher than for wood. 4. Our separation method showed results similar to others in literature, albeit from a completely automated workflow. Analysis of each separation step suggests that the addition of path analysis improved the robustness of our algorithm. Accuracy can be improved with per tree parameter optimization. The library containing our separation script can be easily installed and applied to single tree point cloud.Average processing times are below 10 min for each tree.

Terrestrial laser scanning (TLS) is providing exciting new ways to quantify tree and forest structure, particularly above-ground biomass (AGB). We show how TLS can address some of the key uncertainties and limitations of current approaches to estimating AGB based on empirical allometric scaling equations (ASEs) that underpin all large-scale estimates of AGB. TLS provides extremely detailed non-destructive measurements of tree form independent of tree size and shape. We show examples of three-dimensional (3D) TLS measurements from various tropical and temperate forests and describe how the resulting TLS point clouds can be used to produce quantitative 3D models of branch and trunk size, shape and distribution. These models can drastically improve estimates of AGB, provide new, improved large-scale ASEs, and deliver insights into a range of fundamental tree properties related to structure. Large quantities of detailed measurements of individual 3D tree structure also have the potential to open new and exciting avenues of research in areas where difficulties of measurement have until now prevented statistical approaches to detecting and understanding underlying patterns of scaling, form and function. We discuss these opportunities and some of the challenges that remain to be overcome to enable wider adoption of TLS methods.