More than 12 GW of offshore wind turbines are currently in operation in European waters. To optimise the use of the marine areas, wind farms are typically clustered in units of several hundred turbines. Understanding wakes of wind farms, which is the region of momentum and energy deficit downwind, is important for optimising the wind farm layouts and operation to minimize costs. While in most weather situations (unstable atmospheric stratification), the wakes of wind turbines are only a local effect within the wind farm, satellite imagery reveals wind-farm wakes to be several tens of kilometres in length under certain conditions (stable atmospheric stratification), which is also predicted by numerical models. The first direct in situ measurements of the existence and shape of large wind farm wakes by a specially equipped research aircraft in 2016 and 2017 confirm wake lengths of more than tens of kilometres under stable atmospheric conditions, with maximum wind speed deficits of 40%, and enhanced turbulence. These measurements were the first step in a large research project to describe and understand the physics of large offshore wakes using direct measurements, together with the assessment of satellite imagery and models.

We present an analysis of wind measurements from a series of airborne campaigns conducted to sample the wakes from two North Sea wind farm clusters, with the aim of determining the dependence of the downstream wind speed recovery on the atmospheric stability. The consequences of the stability dependence of wake length on the expected annual energy yield of wind farms in the North Sea are assessed by an engineering model. Wakes are found to extend for significantly longer downstream distances (>50 km) in stable conditions than in neutral and unstable conditions (<15 km). The parameters of one common engineering model are modified to reproduce the observed wake decay at downstream distances >30 km. More significant effects on the energy yield are expected for wind farms separated by distances <30 km, which is generally the case in the North Sea, but additional data would be required to validate the suggested parameter modifications within the engineering model. A case study is accordingly performed to show reductions in the farm efficiency downstream of a wind farm. These results emphasize not only the importance of understanding the impact of atmospheric stability on offshore wind farms but also the need to update the representation of wakes in current industry models to properly include wake-induced energy losses, especially in large offshore clusters. KEYWORDS atmospheric stability, offshore wind farm cluster, wake recovery, wind farm efficiency

In Europe, offshore wind farms have a capacity of 16 GW, with 71% installed at the North Sea. These wind farms represent an additional source of turbulence and may influence the stratification of the marine boundary layer. We present aircraft measurements and simulations showing an impact on temperature and humidity at hub height in the order of 0.5 K and 0.5gkg −1 even 60 km downwind of a wind farm cluster. We extend these simulations to explore a realistic future scenario, suggesting wakes in potential temperature and water vapor propagating more than 100 km downwind. Such impacts of wind farms are only observed in case of a strong stable stratification at rotor height, allowing wind farms to mix warmer air downward.

No abstract

Abstract. This paper presents the unmanned research aircraft Carolo P360 "ALADINA" (Application of Light-weight Aircraft for Detecting IN situ Aerosol) for investigating the horizontal and vertical distribution of ultrafine particles in the atmospheric boundary layer (ABL). It has a wingspan of 3.6 m, a maximum take-off weight of 25 kg and is equipped with aerosol instrumentation and meteorological sensors. A first application of the system, together with the unmanned research aircraft MASC (Multi-Purpose Airborne Carrier) of the Eberhard Karls University of Tübingen (EKUT), is described. As small payload for ALADINA, two condensation particle counters (CPC) and one optical particle counter (OPC) were miniaturised by re-arranging the vital parts and composing them in a space-saving way in the front compartment of the airframe. The CPCs are improved concerning the lower detection threshold and the response time to less than 1.3 s. Each system was characterised in the laboratory and calibrated with test aerosols. The CPCs are operated in this study with two different lower detection threshold diameters of 11 and 18 nm. The amount of ultrafine particles, which is an indicator for new particle formation, is derived from the difference in number concentrations of the two CPCs ( N). Turbulence and thermodynamic structure of the boundary layer are described by measurements of fast meteorological sensors that are mounted at the aircraft nose. A first demonstration of ALADINA and a feasibility study were conducted in Melpitz near Leipzig, Germany, at the Global Atmosphere Watch (GAW) station of the Leibniz Institute for Tropospheric Research (TROPOS) on 2 days in October 2013. There, various ground-based instruments are installed for long-term atmospheric monitoring. The groundbased infrastructure provides valuable additional background information to embed the flights in the continuous atmospheric context and is used for validation of the airborne results. The development of the boundary layer, derived from backscatter signals of a portable Raman lidar POLLY XT , allows a quick overview of the current vertical structure of atmospheric particles. Ground-based aerosol number concentrations are consistent with the results from flights in heights of a few metres. In addition, a direct comparison of ALAD-INA aerosol data and ground-based aerosol data, sampling the air at the same location for more than 1 h, shows comparable values within the range of ± 20 %. MASC was operated simultaneously with complementary flight patterns. It is equipped with the same meteorological instruments that offer the possibility to determine turbulent fluxes. Therefore, additional information about meteorological conditions was collected in the lowest part of the atmosphere. Vertical profiles up to 1000 m in altitude indicate a high variability with distinct layers of aerosol, especially for the small particles of a few nanometres in diameter on 1 particular day. The stratification was almost neutral and two significant aerosol layers were detect...