This work describes the development of a sustainable and low-cost sandwich composite structure made from aluminium skins and bonded to a tubular core with epoxy resin. The core is made from disposed plastic bottle caps. An analysis of variance (ANOVA) has been performed to determine the significance of the orientation of the bottle caps in the core, the use and type of adhesive over the bulk density and the mechanical properties of the sandwich panels. The results show that a core topology made from an alternated orientation of the bottle caps provides an enhancement of the resistance in the face skins and the core. The use of the epoxy adhesive between adjacent bottle caps also gives an increase of the maximum resistance of the panel.

RESUMO -A espécie amazônica Paricá (Schizolobium amazonicum Herb) apresenta rápidos incrementos em altura e diâmetro em poucos anos de cultivo e desenvolve uma madeira com pequena quantidade de nós e defeitos, característica fundamental na sua utilização para fins estruturais. O objetivo deste trabalho foi determinar as propriedades de resistência e rigidez de peças da madeira Paricá em dimensões estruturais, de acordo com a norma ABNT NBR 7190: 2011, bem como realizar a classificação visual das peças para determinação de defeitos como: nós, inclinação de fibras, empenamentos, rachas e fendas. Conclui-se que a madeira de Paricá é classificada como classe C 20 das dicotiledôneas e possui baixa densidade, boa resistência à compressão paralela, grande potencial de utilização na construção civil quando comparada com outras espécies e, em relação à classificação visual, poucos nós, grã direita e poucos empenamentos e distorções.Palavras-chave: Caracterização completa; Estruturas de madeira; Madeira. STRUCTURAL CHARACTERIZATION OF THE AMAZONIAN WOOD SPECIE PARICÁ (Schizolobium amazonicum HERB) IN MEMBERS

RESUMO -O conhecimento do comportamento da madeira mediante ações de curta duração contribui para um projeto estrutural mais seguro, entretanto não sendo a tenacidade parte integrante das propriedades mecânicas comumente investigadas na caracterização deste material. Este trabalho objetivou avaliar, com o uso de modelos de regressões polinomial linear, quadrática e cúbica, a possibilidade da estimativa da tenacidade com o conhecimento da densidade aparente de seis espécies de madeira (Angico, Eucalipto, Jatobá, Paricá, Pinus e Teca). Os resultados dos modelos de regressão evidenciaram a significância e representatividade de todos os ajustes investigados, consistindo o polinomial cúbico o mais eficiente na estimativa da tenacidade da madeira.Palavras-chave: Tenacidade; Modelos de regressão; Densidade aparente. WOODEN TOUGHNESS AS FUNCTION OF THE APPARENT DENSITYABSTRACT -The knowledge on the behavior of wood in situations of short load contributes to the development of a safer structural design. However, toughness is not part of the mechanical properties commonly investigated in the characterization of this material. Therefore, the present study aimed to evaluate, the possibility to estimate the toughness with the knowledge of the apparent density of 6 Brazilian tropical wooden species (Angico, Eucalyptus, Jatobá, Paricá, Pine and Teak), by using linear, quadratic and cubic polynomial regression models. The results highlighted the significance and representation of all adjustments investigated, and the cubic polynomial was the most efficient for estimating the wood toughness.

No abstract

Wood is a material widely used in various sectors of construction, such as in structures and building components. The volume of wood extracted from tropical forests has reached a considerable amount, and this wood is marketed with popular names without prior characterization. Wood density is an easy property to measure, and its use as an estimator of other properties is very common in this sector. This study investigated the possibility of the estimation of important quantities in dimensional stability of Brazilian tropical woods by using the density at 12% moisture content, anhydrous density, and basic density. Testing the ability to estimate radial, axial, tangential, and volumetric shrinkage, anisotropy coefficient, coefficient of volumetric rate of volumetric shrinkage, as well as the rate of volumetric swelling using the densities above, with linear, exponential, geometric, and logarithmic models, the best determination coefficient was: R 2 = 19.58%. The results were, in summary, that the variable density was not a good estimator of the dimensional stability of the wood.

No abstract

ABSTRACT:In Brazil, the characterization of wood is carried out in accordance with the premises established by ABNT NBR 7190standard; however, the determination of wood properties requires the use of equipment, which hinders the wood characterization for the construction professional. To circumvent this problem, the properties of wood strength and stiffness can be estimated through regression models using the apparent density as estimator, being the density a physical property of easy determination. This study aimed to determine 4 physical and 13 mechanical properties of "Angico Branco" wood (Anadenanthera colubrina), and with the aid of regression models based on analysis of variance, estimate the strength and stiffness properties as a function of apparent density. Twelve samples were produced for each test, resulting in a total of 204 experimental determinations. The results of mechanical properties showed consistent performance with other wood species studied, demonstrating their potential use in various applications. From the regression models, only the longitudinal modulus of elasticity in parallel compression to the grain showed a significant result, and the best were obtained with the linear model, which provided determination coefficient (R 2 ) equal to 56.32%.

No abstract