A pesquisa teve, como objetivo, avaliar as alterações físicas e superficiais da madeira de canemaçu (Tetrorchidium rubrivenium) termorretificada, além de orientar o setor madeireiro para possíveis aplicações industriais dessa espécie. Para tanto, foram tratados, termicamente, corpos de prova com 25 x 25 x 100 mm (radial x tangencial x longitudinal) em estufa laboratorial com circulação de ar, sob quatro temperaturas: 130 °C (T130), 150 °C (T150), 180 °C (T180) e 210 °C (T210), pelo período de três horas, além do tratamento controle (TC). Como parâmetros físicos avaliaram-se a estabilidade dimensional e a higroscopicidade da madeira. Já para os ensaios superficiais foram analisadas a colorimetria e a rugosidade. De maneira geral, verificou-se que a termorretificação melhorou as propriedades físicas sendo o T210 o mais efetivo. Os ensaios colorimétricos evidenciaram que a madeira tratada com temperaturas mais baixas (T130 e T150) apresentou coloração branca-acinzentada; já os tratamentos T180 e T210 apresentaram coloração amarelo-claro e marrom-escuro, respectivamente. Os tratamentos mais severos (T180 e T210) proporcionaram aumento na rugosidade da madeira, deixando-a mais áspera. Recomenda-se, neste aspecto, a utilização da madeira termorretificada de Tetrorchidium rubrivenium para fins estéticos, bem como ambientes onde haja oscilação de umidade.
Palavras-chave: colorimetria, modificação térmica, propriedades físicas, rugosidade
Physical and surface changes of wood Tetrorchidium rubrivenium termally treated
ABSTRACTThe research aimed to evaluate the physical and superficial alterations wood canemaçu (Tetrorchidium rubrivenium) thermally treated, in addition to guiding the timber sector for possible industrial applications of this species. For that were thermally treated the specimens with 25 x 25 x 100 mm (radial x tangential x longitudinal) in an oven with air circulation, under four temperatures: 130 °C (T130), 150 °C (T150), 180 °C (T180) and 210 °C (T210) for a period of three hours, and the control treatment (TC). As physical parameters were evaluated dimensional stability and hygroscopicity. As for the surface tests, we analyzed the colorimetry and roughness. In general, it was found that the thermal treated improved physical properties, the T210 being the most effective. The colorimetric assays showed that wood treated with lower temperatures (T130 and T150) showed a grayish-white color, as the T180 and T210 treatments showed light yellow and dark brown, respectively color. The most severe treatments (T180 and T210) have promoted increased roughness of the wood, leaving it more rough. In this respect, it is recommended the use of wood thermally treated Tetrorchidium rubrivenium for aesthetic purposes as well as environments where there is moisture fluctuation.