To investigate the effect of the application of rice husk (RH) and rice husk charcoal (RHC) on soil properties and rice production, pot experiment comprising of five treatments was conducted. Soil was mixed at the rate of 0 (control), 2% and 4% (w/w) with RH and RHC, respectively with randomized complete block design (RCBD). RHC incorporation had a potential to reduce the acidity of the soil, whereas, RH incorporation had almost no effect on the pH of the soil. RH and RHC amendment both increased the saturated hydraulic conductivity, saturated water content, plant available water and field capacity but decreased the bulk density of soil. Crop growth components at harvest revealed that the highest plant height was recorded in RH4%. However, for the panicle length, panicle weight and number of tillers, the highest value was found in RHC2%, 14.2 cm, 4.0 g and 28.8 cm, respectively. Furthermore, number of panicle, 1000-grains weight and grain yield were also found highest in RHC2%, 22.4 g and 4.41 t/ha, respectively. However, for the number of grain per panicle and percentage of filled grain, the highest value was found in RH4%, 79.0 and 88.5, respectively. The grain yield increased by 38%, 28%, 18% and 22% and the biological yield increased by 27%, 18%, 14%, and 16% for RHC2%, RHC4%, RH2%, and RH4%, respectively, compared to that of the control; however, the significant difference was found only for RHC2% for both. The harvest index increased under all application rates of RH and RHC compared to that of control.
