No abstract

This paper provides a synthetic and comprehensive overview on environmentally friendly anticorrosive polymeric coatings. Firstly, the economic and environmental impact of corrosion is presented to highlight the need of anticorrosive polymeric coatings as a flexible and effective solution to protect a metal. Secondly, the implementation of regulations together with the consumer awareness for environmental considerations and protection of health are the driving force for a progressive but significant change in the sector. Therefore, within the protective organic coatings market, this article provides a review of the most recent developments in environmentally friendly solutions, including bio-based and water-borne epoxy, hyperbranched polyester for low- volatile organic compounds (VOC) coatings, waterborne polyurethane and non-isocyanate polyurethanes (NIPUs), and graphene or bio-based fillers for acrylics. Moreover, this paper outlines new trends such as smart additives, bio-based corrosion inhibitors, and functional antibiocorrosive coatings as superhydrophobics. Finally, industrially relevant applications of environmentally friendly anticorrosive polymeric coatings including solutions for marine and off-shore industries are summarized.

Here, we report a straightforward and rapid process using fatty acids to produce a stable superhydrophobic hybrid composite coating on aluminium substrate which is highly resistant to wear under environmental conditions. Furthermore, this novel superhydrophobic metal surface is highly efficient at separating of water/oil systems. The single-step process we adopt involves electrochemical deposition of ZnCl2, α-Al2O3 and lauric acid (C11H23COOH) onto commercial pure aluminium substrate. The resultant static contact angle (170°) and sliding angle (1°) are those of a superhydrophobic coating with self-cleaning properties; while chemical analysis shows that this is the result of generation of zinc laurate (Zn(C11H20COO)2) as a major compound that increases the superhydrophobic character of the coating, generating a flower-like structure 70 nm thick. Different wear tests show the coating is resistant to severe conditions, confirming its real potential against weathering, including sand and 2 water erosion. Finally, a water/oil separation test determined 99% separation efficiency in hexane and ether petroleum systems, in a laboratory-made storage tank.

No abstract

Coextrusion and corolling are the major processes to produce bimetallic rods, tubes and wires, the objective being to perform clad metals, bimetallic joints or seals. The aim of the present work is to produce bimetallic rods showing an ultrafine grained microstructure with enhanced properties. Bimetallic Cu-Al rods were deformed by equal channel angular pressing (ECAP) in order to study their microstructure. ECAP is an interesting process for producing bulk materials with refined microstructure and, consequently, changes in physical, chemical and mechanical properties can be observed. Higher shear strength and dimensional stability are among the advantages of this process. A comparative experimental study of pure commercial copper with cylindrical inner aluminium rods of different diameters processed by one-pass equal channel angular pressing has been carried out. The ECAP die used in this research was a 90º 2-channels intersecting angle. Electron backscattered (EBSD) and X-ray diffraction techniques were used for microstructure characterization (deformation, grain fragmentation and microstrain evaluation) at the interfaces and away from them. It was found that the microstructure in the ECAP deformed Cu-Al bimetallic rods was influenced by the dimensions of the aluminium inner rod. In fact, the microstructure appeared to be much more elongated and refined in the samples containing smaller diameter aluminium rods.