This work describes the development of magnetic levitation (MagLev) to characterize the kinetics of free-radical polymerization of water-insoluble, low-molecular-weight monomers that show a large change in density upon polymerization. Maglev measures density, and certain classes of monomers show a large change in density when monomers covalently join in polymer chains. MagLev characterized both the thermal polymerization of methacrylate-based monomers and the photopolymerization of methyl methacrylate and made it possible to determine the orders of reaction and the Arrhenius activation energy of polymerization. MagLev also made it possible to monitor polymerization in the presence of solids (aramid fibers, and carbon fibers, and glass fibers). MagLev offers a new analytical technique to materials and polymer scientists that complements other methods (even those based on density, such as dilatometry), and will be useful in investigating polymerizations, evaluating inhibition of polymerizations, and studying polymerization in the presence of included solid materials (e.g., for composite materials).
An efficient strategy for the synthesis of monoamine end-functionalized living polymers using ringopening metathesis polymerization with ruthenium initiators is reported. A new end-capping agent for this purpose was synthesized, and its efficiency for end-functionalization was evaluated using two common ruthenium-based initiators. Finally, terminal cross-metathesis was also explored as another alternative toward the synthesis of amine end-functionalized polymers, and the comparison between the two techniques is presented.
Magneto‐Archimedes levitation (MagLev) enables the separation of powdered mixtures of illicit drugs (cocaine, methamphetamine, heroin, fentanyl, and its analogues), adulterants, and diluents based on density, and allows the presumptive identification of individual components. Small samples (mass <50 mg), with low concentrations of illicit drugs, present a particular challenge to analysis for forensic chemists. The MagLev device, a cuvette containing a solution of paramagnetic gadolinium(III) chelate in a non‐polar solvent, placed between two like‐poles‐facing NdFeB magnets, allowed separation of seven relevant compounds simultaneously. In particular, initial separation with MagLev, followed by characterization by FTIR‐ATR, enabled identification of fentanyl in a sample of fentanyl‐laced heroin (1.3 wt % fentanyl, 2.6 wt % heroin, and 96.1 wt % lactose). MagLev allows identification of unknown powders in mixtures and enables confirmatory identification based on structure‐specific techniques.
The rapidly increasing use of digital technologies requires the rethinking of methods to store data. This work shows that digital data can be stored in mixtures of fluorescent dye molecules, which are deposited on a surface by inkjet printing, where an amide bond tethers the dye molecules to the surface. A microscope equipped with a multichannel fluorescence detector distinguishes individual dyes in the mixture. The presence or absence of these molecules in the mixture encodes binary information (i.e., “0” or “1”). The use of mixtures of molecules, instead of sequence-defined macromolecules, minimizes the time and difficulty of synthesis and eliminates the requirement of sequencing. We have written, stored, and read a total of approximately 400 kilobits (both text and images) with greater than 99% recovery of information, written at an average rate of 128 bits/s (16 bytes/s) and read at a rate of 469 bits/s (58.6 bytes/s).
ABSTRACT:In an attempt to introduce monomer sequence control in a growing polynorbornene via ring-opening metathesis polymerization, we employ dioxepins to efficiently determine the location of the monomers on the macromolecule backbone. Owing to the acid-labile acetal group, dioxepins allow scission of the polymer at the point of the dioxepin insertion and thus provide an indirect way to determine the monomer location. Additionally, dioxepins are used as spacers in the synthesis of multiblock polynorbornenes that are readily cleavable to afford the individual polynorbornene blocks.
Locomotion of soft robots typically relies on control of multiple inflatable actuators by electronic computers and hard valves. Soft pneumatic oscillators can reduce the demand on controllers by generating complex movements required for locomotion from a single, constant input pressure, but either have been constrained to low rates of flow of air or have required complex fabrication processes. Here, we describe a pneumatic oscillator fabricated from flexible, but inextensible, sheets that provides high rates of airflow for practical locomotion by combining three instabilities: out-of-plane buckling of the sheets, kinking of tubing attached to the sheets, and a system-level instability resulting from connection of an odd number of pneumatic inverters made from these sheets in a loop. This device, which we call a “buckling-sheet ring oscillator” (BRO), directly generates movement from its own interaction with its surroundings and consists only of readily available materials assembled in a simple process—specifically, stacking acetate sheets, nylon film, and double-sided tape, and attaching an elastomeric tube. A device incorporating a BRO is capable of both translational and rotational motion over varied terrain (even without a tether) and can climb upward against gravity and downward against the buoyant force encountered under water.
In living ring-opening metathesis polymerization (ROMP), a transition-metal-carbene complex polymerizes ring-strained olefins with very good control of the molecular weight of the resulting polymers. Because one molecule of the initiator is required for each polymer chain, however, this type of polymerization is expensive for widespread use. We have now designed a chain-transfer agent (CTA) capable of reducing the required amount of metal complex while still maintaining full control over the living polymerization process. This new method introduces a degenerative transfer process to ROMP. We demonstrate that substituted cyclohexene rings are good CTAs, and thereby preserve the 'living' character of the polymerization using catalytic quantities of the metal complex. The resulting polymers show characteristics of a living polymerization, namely narrow molecular-weight distribution, controlled molecular weights and block copolymer formation. This new technique provides access to well-defined polymers for industrial, biomedical and academic use at a fraction of the current costs and significantly reduced levels of residual ruthenium catalyst. In olefin metathesis reactions, olefinic bonds are rearranged with the help of a transition-metal catalyst 1,2 . In the early days following the discovery of this reaction, ill-defined catalysts 3 were used to carry out this transformation. After Herisson and Chauvin 4 had proposed a reaction mechanism, the olefin metathesis reaction was better understood and soon gained much popularity. Typical catalysts used for olefin metathesis reactions include those based on ruthenium (developed mainly by the Grubbs group 5 ), tungsten and molybdenum (developed mainly by the Schrock group 6 ). Owing to the low oxophilicity of ruthenium compared to those of molybdenum and tungsten, the ruthenium metathesis catalysts (commonly known as Grubbs' catalysts) are more tolerant towards many polar functional groups and residual impurities, as well as to water 7 . Therefore, these catalysts are the catalysts of choice in highly functional organic chemistry transformations as well as for the majority of metathesis polymerizations carried out today. Catalysts G1 (first generation) and G3 (third generation) are the most widely used ruthenium initiators for ring-opening metathesis polymerization (ROMP). In comparison to the G1 initiator, the third-generation catalyst G3 exhibits very fast initiation and propagation rates, and thereby gives polymers with very narrow dispersities and an excellent control over their molecular weights. Owing to its superior stability as well as the favourable polymerization kinetics, the third-generation Grubbs' catalyst G3 was used for this work. ROMP is a polymerization technique that uses the metathesis of cyclic olefins to synthesize linear polymers. Depending on the structure of the monomer, such polymerizations can be controlled perfectly to give polymers with a narrow molecular weight distribution and a controlled average molecular weight. Ring-strained monomers, li...
In situ reduction of chloroauric acid inside an amine-cured epoxy matrix leads to formation of gold nanoparticles which are embedded inside the part. This phenomenon is leveraged to design an authentication system for composites wherein the particles are embedded spatially and are invisible to the naked eye. Under UV light, the particles diffract light and create an easily visible path. The particles penetrate inside the part and create a permanent, cost-effective, tamper-proof code. The advantage of this technique is that this authentication system can be built in composite parts after fabrication of the composite structure. As very small amount (nanograms) of particles are present in the part, negligible change in the thermal characteristics of the parent matrix is observed. The particles can be embedded easily in carbon fiber as well as glass fiber reinforced epoxy structures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.