Abstract-This paper proposes optimal finite-length impulse response (FIR) digital filters, in the least-squares (LS) sense, for compensation of chromatic dispersion (CD) in digital coherent optical receivers. The proposed filters are based on the convex minimization of the energy of the complex error between the frequency responses of the actual CD compensation filter and the ideal CD compensation filter. The paper utilizes the fact that pulse shaping filters limit the effective bandwidth of the signal. Then, the filter design for CD compensation needs to be performed over a smaller frequency range, as compared to the whole frequency band in the existing CD compensation methods. By means of design examples, we show that our proposed optimal LS FIR CD compensation filters outperform the existing filters in terms of performance, implementation complexity, and delay.Index Terms-Chromatic dispersion (CD), digital filter, fiber optics, optimal least-squares (LS) FIR filter.
The bearing capacity of shallow foundations in a non-homogeneous soil profile has been a challenging task in geotechnical engineering. In this paper, a limit equilibrium method is used for calculating bearing capacity factors of shallow foundations constructed on a two-layered granular soil profile. The main objective has been to determine the ultimate bearing capacity computed from equivalent bearing capacity factors N q and N c and comparing that with numerical analysis using finite element methods. It will be shown that the data obtained form the developed method are well comparable with those obtained from FE approach, specially when the difference between shear strength parameters of layers is low which is a practical case for sedimentary soil profiles and also for artificially compacted soils. A computer program has been developed to investigate the influence of various parameters on bearing capacity factors.
Abstract-This paper introduces a multimode transmultiplexer (TMUX) structure capable of generating a large set of user-bandwidths and center frequencies. The structure utilizes fixed integer sampling rate conversion (SRC) blocks, Farrow-based variable interpolation and decimation structures, and variable frequency shifters. A main advantage of this TMUX is that it needs only one filter design beforehand. Specifically, the filters in the fixed integer SRC blocks as well as the subfilters of the Farrow structure are designed only once. Then, all possible combinations of bandwidths and center frequencies are obtained by properly adjusting the variable delay parameter of the Farrow-based filters and the variable parameters of the frequency shifters. The paper includes examples for demonstration. It also shows that, using the rational SRC equivalent of the Farrow-based filters, the TMUX can be described in terms of conventional multirate building blocks which may be useful in further analysis of the overall system.
This paper introduces multimode transmultiplexers (TMUXs) in which the Farrow structure realizes the polyphase components of general lowpass interpolation/decimation filters. As various lowpass filters are obtained by one set of common Farrow subfilters, only one offline filter design enables us to cover different integer sampling rate conversion (SRC) ratios. A model of general rational SRC is also constructed where the same fixed subfilters perform rational SRC. These two SRC schemes are then used to construct multimode TMUXs. Efficient implementation structures are introduced and different filter design techniques such as minimax and least-squares (LS) are discussed. By means of simulation results, it is shown that the performance of the transmultiplexer (TMUX) depends on the ripples of the filters. With the error vector magnitude (EVM) as the performance metric, the LS method has a superiority over the minimax approach.
Abstract-This paper introduces a multi-mode transmultiplexer (TMUX) consisting of Farrow-based variable integer sampling rate conversion (SRC) blocks. The polyphase components of general interpolation/decimation filters are realized by the Farrow structure making it possible to achieve different linear-phase finite-length impulse response (FIR) lowpass filters at the cost of a fixed set of subfilters and adjustable fractional delay values. Simultaneous design of the subfilters, to achieve overall approximately Nyquist (M th-band) filters, are treated in this paper. By means of an example, it is shown that the subfilters can be designed so that for any desired range of integer SRC ratios, the TMUX can approximate perfect recovery as close as desired.
A half-rate low-power 3-tap decision feedback equalizer (DFE) was designed in 90-nm CMOS technology. An improved switched-capacitor-based summer architecture is used in the front-end sample-and-hold to speculate the first feedback tap. Other two taps are canceled using current summation technique. Further power consumption reduction is achieved by using sense-amplifier-based slicer and pass-gate multiplexer instead of CML architecture. An accurate characterization of DFE, based on Least Square Estimation and using random sequence, with certain probabilistic characteristics suitable for intended operating conditions, is described. The Proposed 3-tap DFE consumes 4mW from a 1.2V supply when equalizing 10 Gb/s data passed over a 10" NELCO channel with 15dB of loss at 5GHz.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.