No abstract

The implant surface features affect the osseointegration process. Different surface treatment methods have been applied to improve the surface topography and properties. Trace of different elements may appear on the implant surface, which can modify surface properties and may affect the body’s response. The aim was to evaluate the roughness based on the surface treatment received and the amount and type of trace elements found. Ninety implants (nine different surface treatment) were evaluated. Roughness parameters were measured using white-light-interferometry (WLI). The arithmetical mean for Ra, Rq, Rt, and Rz of each implant system was calculated, and Fisher’s exact test was applied, obtaining Ra values between 0.79 and 2.89 µm. Surface chemical composition was evaluated using X-ray photoelectron spectroscopy (XPS) at two times: as received by the manufacturer (AR) and after sputter-cleaning (SC). Traces of several elements were found in all groups, decreasing in favor of the Ti concentration after the sputter-cleaning. Within the limitations of this study, we can conclude that the surface treatment influences the roughness and the average percentage of the trace elements on the implant surface. The cleaning process at the implant surface should be improved by the manufacturer before assembling the implant.

The surface modifications of titanium dental implants play important roles in the enhancement of osseointegration. The objective of the present study was to test two different implant surface treatments on a rabbit model to investigate the osseointegration. The tested surfaces were: a) acid-etched surface with sandblasting treatment (SA) and b) an oxidized implant surface (OS). The roughness was measured by an interferometeric microscope with white light and the residual stress of the surfaces was measured with X-ray residual stress Bragg–Bentano diffraction. Six New Zealand white rabbits were used for the in vivo study. Implants with the two different surfaces (SA and OS) were inserted in the femoral bone. After 12 weeks of implantation, histological and histomorphometric analyses of the blocks containing the implants and the surrounding bone were performed. All the implants were correctly implanted and no signs of infection were observed. SA and OS surfaces were both surrounded by newly formed trabeculae. Histomorphometric analysis revealed that the bone–implant contact % (BIC) was higher around the SA implants (53.49 ± 8.46) than around the OS implants (50.94 ± 16.42), although there were no significant statistical differences among them. Both implant surfaces (SA and OS) demonstrated a good bone response with significant amounts of newly formed bone along the implant surface after 12 weeks of implantation. These results confirmed the importance of the topography and physico–chemical properties of dental implants in the osseointegration.

Implant dentistry constitutes a therapeutic modality in the prosthodontic treatment of partially and totally edentulous patients. This study reports a long-term evaluation of treatment by the early loading of acid-etched surface implants. Forty-eight partially and totally edentulous patients were treated with 169 TSA Defcon® acid-etched surface implants for prosthodontic rehabilitation. Implants were loaded after a healing free-loading period of 6–8 weeks in mandible and maxilla, respectively. Implant and prosthodontic clinical findings were followed during at least 17 years. Clinical results indicate a survival and success rate of implants of 92.9%, demonstrating that acid-etched surface achieves and maintains successful osseointegration. Five implants in three patients were lost during the healing period. Sixty-five prostheses were placed in 45 patients over the remaining 164 implants, 30 single crowns, 21 partially fixed bridges, 9 overdentures, and 5 full-arch fixed rehabilitations. A total of 12 implants were lost during the follow-up period. Mean marginal bone loss was 1.91 ± 1.24 mm, ranging from 1.1 to 3.6 mm. The most frequent complication was prosthetic technical complications (14.2%), followed by peri-implantitis (10.6%). The mean follow-up was of 214.4 months (208–228 months). Prosthodontic rehabilitation with an early-loading protocol over acid-etched surface implants is a successful implant treatment.

The aim of this study was to show the clinical outcomes of the immediate loading of implants inserted by guided surgery in edentulous mandible patients. Edentulous mandible patients were diagnosed with oral examination, cone beam computerized tomography and diagnostic casts for intermaxillary relations and treated with 8–10 implants for rehabilitation with guided surgery and immediate loading. After flapless surgery, implants were loaded with an immediate acrylic temporary prosthesis. After a period of six months, a ceramic definitive full-arch prosthesis was placed. A total of 22 patients (12 females and 10 males) were treated with 198 implants. Eleven patients (50%) had a previous history of periodontitis. Six patients (27.3%) were smokers. The follow-up was 84.2 ± 4.9 months. Clinical outcomes showed a global success rate of 97.5% of implants. Five implants were lost during the healing phase with provisional prosthesis. Twenty-two fixed full-arch rehabilitations were placed in the patients over the 193 remaining implants. Mean marginal bone loss was 1.44 mm ± 0.45 mm. Six patients (27.3%) showed some kind of mechanical prosthodontic complication. Eighteen (9.3%) of the 193 remaining implants were associated with peri-implantitis. The antecedents of peri-implantitis are critical elements for the survival of the implants. The loss of implants was significant in patients who smoked up to 10 cigarettes, compared to non-smokers. Peri-implantitis is one of the key elements in the long-term follow-up of implants and it was more manifest in smoking patients, and in those with a history of peri-implantitis. Marginal bone loss was more significant in smokers. Full-arch rehabilitation is presented as a predictable alternative with minor fatigue problems that are easily solvable.

BackgroundThe aim of this study was to assess the dental status (DMFT) in patients with schizophrenia compared with a control group.MaterialIn this case–control study, 50 patients with schizophrenia attended in the Psychiatric Unit at the Virgen Macarena University Hospital of Seville were compared with 50 people (without systemic diseases and not taking psychotropic drugs) in a control group attended in the School of Dentistry of Seville. Decayed, missing and filled teeth (DMFT) were assessed according to the World Health Organization WHO criteria.ResultsPatients with schizophrenia showed a decayed teeth (DT) score of 7.26 ± 5.69 compared with 6.50 ± 4.37 for patients the control group. These differences were significant and suggest that dental caries are most prevalent in patients with schizophrenia. People who smoked showed significantly higher DT scores in both groups. Among patients with schizophrenia, smokers scored 9.34 ± 5.42 compared with 4.38 ± 4.82 for non-smokers. Among the healthy controls, smokers scored 6.88 ± 4.85 compared with 6.12 ± 3.85 for non-smokers (p < 0.05). Patients with schizophrenia showed a missing teeth (MT) score of 9.10 ± 8.56 compared with 5.38 ± 5.14 in control patients. MT scores increased significantly with age and with smoking in both groups of patients (p < 0.05). Patients with schizophrenia showed a filled teeth (FT) score of 1.38 ± 2.70 compared with 2.34 ± 3.48 in control patients. FT differences in gender and smoking habits between patients with schizophrenia and healthy control subjects were statistically significant (p < 0.05). This data, along with the DT scores, suggests that patients with schizophrenia have extensive untreated dental disease.ConclusionsPatients with schizophrenia constitute a high risk population for dental health. This group showed a greater prevalence of decayed and missing teeth and more extensive treatment needs.

Objectives: To study the dental status and treatment needs of institutionalized older adults with chronic mental illness compared to a non-psychiatric control sample. Study Design: The sample size was 100, in which 50 were psychogeriatric patients (study group; SG) classified according to DSM-IV, with a mean age of 69.6 ± 6.7 years, and 50 non-psychiatric patients (control group; CG), with a mean age of 68.3 ± 6.9 years. Clinical oral health examinations were conducted and caries were recorded clinically using the Decayed, Missing and Filled Teeth Index (DMFT). Results were analyzed statistically using the Student’s t-test or analysis of variance. Results: Caries prevalence was 58% and 62% in SG and CG, respectively. DMFT index was 28.3 ± 6.6 in SG and 21.4 ± 6.07 in CG (p < 0.01). Mean number of decayed teeth was higher in SG (3.1) compared to CG (1.8) (p=0.047). Mean number of missing teeth were 25.2 and 16.4 in SG and CG respectively (p<0.05). DMFT scores were higher in SG in all the age groups (p < 0.01). Mean number of teeth per person needing treatment was 3.4 in SG and 1.9 in CG (p= 0.037). The need for restorative dental care was significantly lower in the SG (0.8 teeth per person) than in the CG (1.7 teeth per person) (p = 0.043). Conclusions: Institutionalized psychiatric patients have significantly worse dental status and more dental treatment needs than non-psychiatric patients. Key words:Gerodontology, oral health, older adult, psychiatric patients, schizophrenia.

Sixty-four fractured commercially pure titanium (cp-Ti) narrow dental implants (NDIs) with similar macrogeometry and connection designs were studied after different implantation times in humans in order to determine their reliability and to evaluate the causes of the fracture. These NDIs were compared with other similar implants, made with alloyed titanium with 15% Zr and with 12% strained titanium. Original implants were tested under static and fatigue conditions, simulating the tri-axial loads in the mouth by means of a Bionix hydraulic test machine. Fractography was studied using field-emission scanning electron microscopy (FSEM). The results showed that cp-Ti NDI exhibits low strength for mechanical cycling, and the alloyed Ti and strained titanium increase the mechanical strength, guaranteeing long term mechanical behavior. NDIs fractured due to fatigue, and, in some cases, the presence of cracks in the original NDIs quickly led to fracture. These cracks were attributed to plastic deformation during machining were found to be exacerbated due to acid etching in the passivation process. All cases of fracture were cp-Ti dental implants due to the low fatigue limit. The results show that, when titanium is alloyed or cold-worked, the fatigue limit is higher than cp-Ti. This in vitro research will help clinicians to select a better NDI system for safer treatment.