Conducting polymers (CPs) find applications in energy conversion and storage, sensors, and biomedical technologies once processed into thin films. Hydrophobic CPs, like poly(3,4-ethylenedioxythiophene) (PEDOT), typically require surfactant additives, such as poly(styrenesulfonate) (PSS), to aid their aqueous processability as thin films. However, excess PSS diminishes CP electrochemical performance, biocompatibility, and device stability. Here, we report the electrosynthesis of PEDOT thin films at a polarized liquid|liquid interface, a method nonreliant on conductive solid substrates that produces free-standing, additive-free, biocompatible, easily transferrable, and scalable 2D PEDOT thin films of any shape or size in a single step at ambient conditions. Electrochemical control of thin film nucleation and growth at the polarized liquid|liquid interface allows control over the morphology, transitioning from 2D (flat on both sides with a thickness of <50 nm) to “Janus” 3D (with flat and rough sides, each showing distinct physical properties, and a thickness of >850 nm) films. The PEDOT thin films were p -doped (approaching the theoretical limit), showed high π–π conjugation, were processed directly as thin films without insulating PSS and were thus highly conductive without post-processing. This work demonstrates that interfacial electrosynthesis directly produces PEDOT thin films with distinctive molecular architectures inaccessible in bulk solution or at solid electrode–electrolyte interfaces and emergent properties that facilitate technological advances. In this regard, we demonstrate the PEDOT thin film’s superior biocompatibility as scaffolds for cellular growth, opening immediate applications in organic electrochemical transistor (OECT) devices for monitoring cell behavior over extended time periods, bioscaffolds, and medical devices, without needing physiologically unstable and poorly biocompatible PSS.

The growth of vertically aligned and ordered polyaniline nanofilaments is controlled by potentiostatic polymerization through hexagonally packed and oriented mesoporous silica films. In such small pore template (2 nm in diameter), quasi-single PANI chains are likely to be produced. From chronoamperometric experiments and using films of various thicknesses (100-200 nm) it is possible to evidence the electropolymerization transients, wherein each stage of polymerization (induction period, growth, and overgrowth of polyaniline on mesoporous silica films) is clearly identified. The advantageous effect of mesostructured silica thin films as hard templates for the generation of isolated polyaniline nanofilaments is demonstrated from enhancement of the reversibility between the conductive and the nonconductive states of polyaniline and the higher electroactive surface areas displayed for all mesoporous silica/PANI composites. The possibility to control and tailor the growth of conducting polymer nanofilaments offers numerous opportunities for applications in various fields including energy, sensors and biosensors, photovoltaics, nanophotonics, or nanoelectronics.

The interface formed between two immiscible electrolyte solutions (ITIES) constitutes a fantastic playground for the investigation of charge (under the form of either ion or electron) transfer processes. We have reviewed here the routes for the modification of such soft interfaces by an accurate electrochemical control. The three main strategies developed in the past four decades include (i) the electrochemically controlled assembly of molecules and nano-objects; (ii) the in-situ electrogeneration of nanomaterials and (iii) the use of ex-situ synthesised membranes. Applications of functionalized ITIES in the fields of redox catalysis and electroanalysis of modified soft interfaces are also discussed.

Breakthrough alternative technologies are urgently required to alleviate the critical need to decarbonise our energy supply. We showcase non-conventional approaches to battery and solar energy conversion and storage (ECS) system design that harness key attributes of immiscible electrolyte solutions, especially the membraneless separation of redox active species and ability to electrify certain liquid-liquid interfaces. We critically evaluate the recent development of membraneless redox flow batteries based on biphasic systems, where one redox couple is confined to an immiscible ionic liquid or organic solvent phase, and the other couple to an aqueous phase. Common to all solar ECS devices are the abilities to harvest light, leading to photo-induced charge carrier separation, and separate the products of the photo-reaction, minimising recombination. We summarise recent progress towards achieving this accepted solar ECS design using immiscible electrolyte solutions in photo-ionic cells, to generate redox fuels, and biphasic "batch" water splitting, to generate solar fuels.

The thermodynamic theory underpinning closed bipolar electrochemistry in a 4-electrode configuration is presented; a technique applicable to spectro-electroanalysis, energy storage, electrocatalysis and electrodeposition.

No abstract

The direct electron transfer between indium-tin oxide electrodes (ITO) and cytochrome c encapsulated in different sol-gel silica networks was studied. Cyt c@silica modified electrodes were synthesized by a two-step encapsulation method mixing a phosphate buffer solution with dissolved cytochrome c and a silica sol prepared by the alcohol free sol-gel route. These modified electrodes were characterized by cyclic voltammetry, UV-visible spectroscopy and in situ UV-visible spectroelectrochemistry.The electrochemical response of encapsulated protein is influenced by the terminal groups of the silica pores. Cyt c does not present electrochemical response in conventional silica (hydroxyl terminated) or phenyl terminated silica. Direct electron transfer to encapsulated cytochrome c and ITO electrodes only takes place when the protein is encapsulated in methyl modified silica networks.

The dynamics of ion intercalation into solid matrices influences the performance of key components in most energy storage devices (Li-ion batteries, supercapacitors, fuel cells, etc.).Electrochemical methods provide key information on the thermodynamics and kinetics of these ion transfer processes but are restricted to matrices supported on electronically conductive substrates. In this article, the electrified liquid|liquid interface is introduced as an ideal platform to probe the thermodynamics and kinetics of reversible ion intercalation with nonelectronically active matrices. Zinc(II) meso-tetrakis(4-carboxyphenyl)porphyrins were selfassembled into floating films of ordered nanostructures at the water|-trifluorotoluene interface. Electrochemically polarising the aqueous phase negatively with respect to the organic phase lead to organic ammonium cations intercalating into the zinc porphyrin nanostructures by binding to anionic carboxyl sites and displacing protons through ion exchange at neutral carboxyl sites. The cyclic voltammograms suggested a positive cooperativity mechanism for ion intercalation linked with structural rearrangements of the porphyrins within the nanostructures, and were modelled using a Frumkin isotherm. The model also provided a robust understanding of the dependence of the voltammetry on the pH and organic electrolyte concentration. Kinetic analysis was performed using potential step chronoamperometry, with the current transients composed of "adsorption" and nucleation components. The latter were associated with domains within the nanostructures where, due to structural rearrangements, ion binding and exchange took place faster. This work opens 2 opportunities to study the thermodynamics and kinetics of purely ionic ion intercalation reactions (not induced by redox reactions) in floating solid matrices using any desired electrochemical method.