No abstract

MXenes are 2D ceramic materials, especially carbides, nitrides, and carbonitrides derived from their parent ‘MAX’ phases by the etching out of ‘A’ and are famous due to their conducting, hydrophilic, biocompatible, and tunable properties. However, they are hardly stable in the outer environment, have low biodegradability, and have difficulty in drug release, etc., which are overcome by MXene/Polymer nanocomposites. The MXenes terminations on MXene transferred to the polymer after composite formation makes it more functional. With this, there is an increment in photothermal conversion efficiency for cancer therapy, higher antibacterial activity, biosensors, selectivity, bone regeneration, etc. The hydrophilic surfaces become conducting in the metallic range after the composite formation. MXenes can effectively be mixed with other materials like ceramics, metals, and polymers in the form of nanocomposites to get improved properties suitable for advanced applications. In this paper, we review different properties like electrical and mechanical, including capacitances, dielectric losses, etc., of nanocomposites more than those like Ti3C2Tx/polymer, Ti3C2/UHMWPE, MXene/PVA‐KOH, Ti3C2Tx/PVA, etc. along with their applications mainly in energy storing and biomedical fields. Further, we have tried to enlist the MXene‐based nanocomposites and compare them with conducting polymers and other nanocomposites. The performance under the NIR absorption seems more effective. The MXene‐based nanocomposites are more significant in most cases than other nanocomposites for the antimicrobial agent, anticancer activity, drug delivery, bio‐imaging, biosensors, micro‐supercapacitors, etc. The limitations of the nanocomposites, along with possible solutions, are mentioned.

No abstract

Global warming and water/air contamination caused by human activities are major challenges in environmental pollution and climate change. The improper discharge of a large amount of agro-forest byproduct is accelerating these issues mainly in developing countries. The burning of agricultural byproducts causes global warming, whereas their improper waste management causes water/air pollution. The conversion of these waste materials into effective smart materials can be considered as a promising strategy in waste management and environmental remediation. Over the past decades, activated carbons (ACs) have been prepared from various agricultural wastes and extensively used as adsorbents. The adsorption capacity of ACs is linked to a well-developed porous structure, large specific surface area, and rich surface functional moieties. Activated carbon needs to increase their adsorption capacity, especially for specific adsorbates, making them suitable for specific applications, and this is possible by surface modifications of their surface chemistry. The modifications of surface chemistry involve the introduction of surface functional groups which can be carried out by various methods such as acid treatment, alkaline treatment, impregnation, ozone treatment, plasma treatment, and so on. Depending on the treatment methods, surface modification mainly affects surface chemistry. In this review, we summarized several modification methods for agricultural-waste-based ACs. In addition, the applications of AC for the adsorption of various pollutants are highlighted.

Dural defects are a common problem in neurosurgical procedures and should be repaired to avoid complications such as cerebrospinal fluid leakage, brain swelling, epilepsy, intracranial infection, and so on. Various types of dural substitutes have been prepared and used for the treatment of dural defects. In recent years, electrospun nanofibers have been applied for various biomedical applications, including dural regeneration, due to their interesting properties such as a large surface area to volume ratio, porosity, superior mechanical properties, ease of surface modification, and, most importantly, similarity with the extracellular matrix (ECM). Despite continuous efforts, the development of suitable dura mater substrates has had limited success. This review summarizes the investigation and development of electrospun nanofibers with particular emphasis on dura mater regeneration. The objective of this mini-review article is to give readers a quick overview of the recent advances in electrospinning for dura mater repair.