How droplet microfluidics can be used to fabricate solid-shelled microcapsules having precisely controlled release behavior is described. Glass capillary devices enable the production of monodisperse double emulsion drops, which can then be used as templates for microcapsule formation. The exquisite control afforded by microfluidics can be used to tune the compositions and geometrical characteristics of the microcapsules with exceptional precision. The use of this approach to fabricate microcapsules that only release their contents when exposed to a specific stimulus--such as a change in temperature, exposure to light, a change in the chemical environment, or an external stress--only after a prescribed time delay, and at a prescribed rate is reviewed.

The ability to perform laboratory operations on small scales using miniaturized devices provides numerous benefits, including reduced quantities of reagents and waste as well as increased portability and controllability of assays. These operations can involve reaction components in the solution phase and as a result, their miniaturization can be accomplished through microfluidic approaches. One such approach, droplet microfluidics, provides a high-throughput platform for a wide range of assays and approaches in chemistry, biology and nanotechnology. We highlight recent advances in the application of droplet microfluidics in chipbased technologies, such as single-cell analysis tools, small-scale cell cultures, in-droplet chemical synthesis, high-throughput drug screening, and nanodevice fabrication.

Colloidal capsules can sustain an external osmotic pressure; however, for a sufficiently large pressure, they will ultimately buckle. This process can be strongly influenced by structural inhomogeneities in the capsule shells. We explore how the time delay before the onset of buckling decreases as the shells are made more inhomogeneous; this behavior can be quantitatively understood by coupling shell theory with Darcy's law. In addition, we show that the shell inhomogeneity can dramatically change the folding pathway taken by a capsule after it buckles.

We use a microfluidic device to prepare monodisperse amphiphilic particles in the shape of a crescent-moon and use these particles to stabilize oil droplets in water. The microfluidic device is comprised of a tapered capillary in a theta (θ) shape that injects two oil phases into water in a single receiving capillary. One oil is a fluorocarbon, while the second is a photocurable monomer, which partially wets the first oil drop; silica colloids in the monomer migrate and adsorb to the interface with water but do not protrude into the oil interface. Upon UV-induced polymerization, solid particles with the shape of a crescent moon are formed; removal of fluorocarbon oil yields amphiphilic particles due to the selective adsorption of silica colloids. The resultant amphiphilic microparticles can be used to stabilize oil drops in a mixture of water and ethanol; if they are packed to sufficient surface density on the interface of the oil drop, they become immobilized, preventing direct contact between neighboring drops, thereby providing the stability.

Bringing droplets to life: A cytoskeletal protein (red dots, see scheme) is expressed in artificial cells composed of biocompatible polymersomes, which encapsulate expression machinery and amino acid building blocks. Release of the expressed proteins can be triggered by a negative osmotic shock.