Bending strength is a parameter used in wood structure planning. The purpose of this study was to determine the effect of time and water of immersion on increasing bending strength. The main ingredient of this research is malapoga wood (Toona Ciliata M. Roem) which was previously preserved by immersion with brackish water, sea water and river for 2,4,6 and 8 weeks. Bending strength specimen and testing procedure refer to ASTM D14. A cross section of the test specimen is then subjected to a macro photograph to determine its failure mechanism. The test results show that Immersion using river water gives a greater bending strength value followed by using brackish water and sea water. The maximum bending strength of the river water is 26. 64 MPa at the time of immersion 4 weeks later followed by brackish water at 25. 86 MPa while the maximum bending strength value of seawater occurs in immersion for 6 weeks which is 24. 52 MPa. The immersion time causes the malapoga wood to become denser due to all the cavities in the malapoga wood filled with material contained in brackish water, sea and river so that the fibers of malapoga wood close up, dry out and crystallize inside the malapoga wood cavity which causes the bending strength of malapoga to increase.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.