We introduce a practical dielectric metasurface design for microwave frequencies. The metasurface is made of an array of dielectric resonators held together by dielectric connections thus avoiding the need of a mechanical support in the form of a dielectric slab and the spurious multiple reflections that such a slab would generate. The proposed design can be used either for broadband metasurface applications or monochromatic wave transformations. The capabilities of the concept to manipulate the transmission phase and amplitude of the metasurface are supported by numerical and experimental results. Finally, a half-wave plate and a quarter-wave plate have been realized with the proposed concept.

We present the design of a new microwave all-dielectric chiral metasurface with circular dichroism behavior based on elliptic dielectric resonators (EDRs). During the design procedure, we have first optimized numerically the effects of the main design parameters such as the resonator's size and orientation, as well as the size of the slot within them, on the metasurface transmission over the frequency band 10-20 GHz. Measurements on the final metasurface prototype have shown a large circular dichroism (Δ = 0 61 and Δ = 0 5) over two bands .05 GHz) with ellipticities close to 45°which means that the developed device can be used as a circular polarization filter and circular polarizer at microwave frequencies.

This study presents, for the first time, a novel design of ultra-wideband (UWB), circularly polarized and highly directive log-spiral THz photoconductive antenna. The proposed antenna is simulated in High Frequency Structure Simulator using gold as the antenna electrode material which is backed by a quartz substrate (ε r = 3.78, tan δ = 0.0001) and hemispherical silicon-based lens with a diameter of 140 μm. A comprehensive detailed parametric study of the antenna design parameters is performed in the frequency range of 1 to 6 THz for the optimal design of the developed antenna structure. The optimal antenna structure with integrated lens has UWB characteristics with −10 dB impedance bandwidth of 5 THz and 3 dB axial ratio bandwidth of around 4 THz. The observed directivity and half-power beam width of the presented design varies in the range 5 to 12 dBi and 34 to 62 , respectively, for the frequency range of 1 to 4 THz. The wideband, high directivity as well as highefficiency (>50%) characteristics of the proposed design make it a favorable choice for the THz sensing and imaging applications.

This work presents the design and analysis of a metal-insulator-metal (MIM)-based optical log spiral rectenna for efficient energy harvesting at 28.3 THz. To maximize the benefits of the enhanced field of the proposed nano-antenna in the rectification process, the proposed design considers the antenna arms (Au) as the electrodes of the rectifying diode and the insulator is placed between the electrode terminals for the compact design of the horizontal MIM rectenna. The rectifier insulator, Al2O3, was inserted at the hotspot located in the gap between the antennas. A detailed analysis of the effect of different symmetric and asymmetric MIM-configurations (Au-Al2O3-Ag, Au-Al2O3-Al, Au-Al2O3-Cr, Au-Al2O3-Cu, and Au-Al2O3-Ti) was conducted. The results of the study suggested that the asymmetric configuration of Au-Al2O3-Ag provides optimal results. The proposed design benefits from the captured E-field intensity, I-V, resistivity, and responsivity and results in a rectenna that performs efficiently.

No abstract

We present the design of all-dielectric Quarter-Wave Plate (QWP) and Half-Wave Plate (HWP) metasurfaces based on elliptic dielectric resonators (EDRs) for the transmission control of electromagnetic waves over the frequency band 20-30 GHz. First, an extensive numerical analysis was realized by studying the effect of the resonators geometry (thickness and ellipticity) on the transmission of both -and -polarized waves. Then, based on the numerical analysis, we have realized and characterized experimentally both QWP and HWP all-dielectric metasurfaces.

A Vivaldi dipole rectenna system for infrared (IR) energy harvesting is investigated. First, a parametric study on the Vivaldi dipole antenna is performed to collect the maximum electric field between the Vivaldi poles. The antenna arms were optimized to achieve a high-efficiency rectenna system. The two arms of the antenna were formed using two different metals, that is, gold and titanium. These two metals have different work functions, which facilitate the diode operation through tunneling at zero bias. The two arms of the Vivaldi dipole are overlapped, and a suitable insulator layer is injected in the overlapped area to form the metal-insulator-metal (MIM) diode. The MIM diode is an ideal candidate for this operation as it works without any bias, provided the two metals have different work functions. For rectenna operation, it is crucial that the rectifying diodes should work without any aid of external bias. The Al 2 O 3 is the insulator layer of the MIM diode. We have chosen Al 2 O 3 because it has a low dielectric constant at terahertz frequency regime, which allows us to match the operational cutoff frequency, that is, 28.3 THz. A parametric study of the Al 2 O 3 insulator layer is performed to increase the captured received intensity. At the end, the nano-antenna operates at a frequency band of [26 … 30 THz] to harvest IR energy from the environment with good efficiency and demonstrate its capacity to capture incident waves and obtain high-intensity values within its gap. It is a development that could eventually boost electricity generation.

No abstract