No abstract

No abstract

Graphene is currently attracting attention for radiation absorption particularly at gigahertz and terahertz frequencies. In this work, composites formed by grapheneaugmented γ-Al 2 O 3 nanofibers embedded into the α-Al 2 O 3 matrix are tested for X-band absorption efficiency. Composites with 15 and 25 wt % of graphene fillers with shielding effectiveness (SE) of 38 and 45 dB, respectively, show a high reflection coefficient, while around the electrical percolation threshold (∼1 wt %), an SE of 10 dB was achieved. Furthermore, based on the dielectric data obtained for varying fractions of graphene-/γ-Al 2 O 3 -added fillers, a functionally graded multilayer is constructed to maximize the device efficiency. The fabricated multilayer offers the highest absorption efficiency of 99.99% at ∼9.6 GHz and a full X-band absorption of >90% employing five lossy layers of 1−3−5−15 and 25 wt % of graphene/γ-Al 2 O 3 fillers. The results prove a remarkable potential of the fillers and various multilayer designs for broad-band and frequency-specific microwave absorbers.

No abstract

The remarkable tunability of 2D carbon structures combined with their non-toxicity renders them interesting candidates for thermoelectric applications. Despite some limitations related to their high thermal conductivity and low Seebeck coefficients, several other unique properties of the graphene-like structures could out-weight these weaknesses in some applications. In this study, hybrid structures of alumina ceramics and graphene encapsulated alumina nanofibers are processed by spark plasma sintering to exploit advantages of thermoelectric properties of graphene and high stiffness of alumina. The paper focuses on thermal and electronic transport properties of the systems with varying content of nanofillers (1–25 wt.%) and demonstrates an increase of the Seebeck coefficient and a reduction of the thermal conductivity with an increase in filler content. As a result, the highest thermoelectric figure of merit is achieved in a sample with 25 wt.% of the fillers corresponding to ~3 wt.% of graphene content. The graphene encapsulated nanofibrous fillers, thus, show promising potential for thermoelectric material designs by tuning their properties via carrier density modification and Fermi engineering through doping.