The International Fusion Materials Irradiation Facility (IFMIF), presently in its Engineering Validation and Engineering Desi gn Activities (EVEDA) phase under the frame of the Broader Approach Agreement between Europe and Japan, accomplished in summer 2013, on schedule, its EDA phase with the release of the engineering design report of the IFMIF plant, which is here described. Many improvements of the design from former phases are implemented, particularly a reduction of beam losses and operational costs thanks to the superconducting accelerator concept, the re-location of the quench tank outside the 1 2 × test cell (TC) with a reduction of tritium inventory and a simplification on its replacement in case of failure, the separation of the irradiation modules from the shielding block gaining irradiation flexibility and enhancement of the remote handling equipment reliability and cost reduction, and the water cooling of the liner and biological shielding of the TC, enhancing the efficiency and economy of the related sub-systems. In addition, the maintenance strategy has been modified to allow a shorter yearly stop of the irradiation operations and a more careful management of the irradiated samples. The design of the IFMIF plant is intimately linked with the EVA phase carried out since the entry into force of IFMIF/EVEDA in June 2007. These last activities and their on-going accomplishment have been thoroughly described elsewhere (Knaster J et al [19]), which, combined with the present paper, allows a clear understanding of the maturity of the European-Japanese international efforts. This released IFMIF Intermediate Engineering Design Report (IIEDR), which could be complemented if required concurrently with the outcome of the on-going EVA, will allow decision making on its construction and/or serve as the basis for the definition of the next step, aligned with the evolving needs of our fusion community.
The use of lithium ceramic pebble beds has been considered in many blanket designs for the fusion reactors. Lithium ceramics have received a significant interest as tritium breeders for the fusion blankets during the last three decades. The thermal performance of the lithium ceramic pebble beds plays a key role for the fusion blankets. In order to study the heat transfer in the blanket, the effective thermal conductivity of the lithium ceramics pebble beds has to be well measured and characterized. The data of effective thermal conductivity of lithium ceramic pebble beds is important for the blanket design. Several studies have been dedicated to investigate the effective conductivity of the lithium ceramics pebble beds. The objective of this work is to review and compare the available data, presented by various studies, of effective conductivity of lithium ceramic pebble beds in order to address the current status of these data.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.