El auge de la construcción de grandes obras de ingeniería ha impulsado la demanda por acero, lo que ha generado un incremento en la producción de residuos siderúrgicos, una situación que causa problemas ambientales debido a la acumulación y no disposición adecuada de estos subproductos. El uso de materiales reciclados en diferentes procesos debe estar enfocado hacia el desarrollo sostenible y la protección del medio ambiente. Este trabajo se desarrolló con el objetivo de estudiar el uso de la escoria de horno al oxigeno (BOF) y el polvo de alto horno (AH) para fabricar mezclas asfálticas en caliente para pavimentos como una alternativa para mitigar los problemas ambientales derivados de la acumulación de residuos siderúrgicos y de la explotación de materiales no renovables, como la grava y la arena. Para lograr el objetivo, se analizaron tres tipos de mezclas asfálticas, una mezcla con materiales convencionales (control) y dos mezclas sustituyendo parcial y totalmente el agregado grueso por BOF y el agregado fino por polvo de AH. El diseño de las mezclas se realizó con la metodología Ramcodes, la cual se basa en el principio del polígono de vacíos. Se realizaron ensayos para evaluar las características físicas y la susceptibilidad al agua y deformación plástica de cada tipo de mezcla. Los resultados de este estudio indican que es factible el uso de los residuos siderúrgicos analizados para reemplazar parcialmente los agregados convencionales en la pavimentación de carreteras.
Objetivo: Este trabajo hace una revisión de los estudios científicos realizados a nivel internacional con el fin de actualizar el conocimiento sobre cuáles son los beneficios que aporta la práctica del Tai Chi Chuan (TCC) sobre la osteoartritis de rodilla (OR), el equilibrio, el miedo a las caídas y la calidad de vida. Método: Se realizó una búsqueda bibliográfica sobre ocho bases de datos internacionales (Medline-Pubmed, Scirus, Pascal, ScienceDirect, SportDiscus, Science Citation Index, BIOSIS y PsycINFO) hasta abril del año 2012. Resultados: El número total de estudios analizados fue de 74, de los cuales 13 corresponden a revisiones sistemáticas y 61 a estudios específicos (42 ensayos aleatorios controlados (EAC) y 19 ensayos no controlados (ENC). En particular se analizaron 11 estudios con relación a la osteoartritis de rodilla (7 EAC y 4 ENC), 32 sobre el equilibrio-miedo a las caídas (26 EAC y 6 ENC), y 30 sobre calidad de vida (18 EAC y 12 ENC) Conclusión: Los efectos de TCC sobre la OA son contradictorios, aunque se observa una tendencia positiva respecto al control de dolor y la mejora en la funcionalidad física. Respecto a los efectos sobre el equilibrio-miedo a la caída se ha registrado una mejora significativa en el equilibrio estático y dinámico, y en la confianza respecto al miedo a la caída. Con relación a la calidad de vida la práctica del TCC aporta mejoras en las dimensiones de bienestar emocional, percepción de sí mismo, bienestar corporal. Estos resultados obtenidos deben ser tomados con cierta precaución dado que gran número de los estudios examinados muestran carencias metodológicas en cuanto al diseño de investigación (muestras reducidas, carencias en los criterios de inclusión y de exclusión de los participantes, deficiencias en los análisis estadísticos, carencias en la estandarización de la medición de resultados, etc.) y la información específica respecto a las condiciones del programa de TCC utilizado (el estilo practicado, la dosificación, la experiencia de los instructores, la altura en las posturas, el tiempo de ejecución de cada forma, etc.)
En este artículo se evalúa la influencia de la andradita en la resistencia mecánica de un geopolímero sintetizado a partir de escoria blanca de horno convertidor y escoria negra de horno eléctrico. Como activadores se utilizó hidróxido de sodio 12 M y silicato de sodio 5 M. El hidróxido de sodio se mantuvo constante en 5% y en 15% en silicato de sodio. Se añadió material cerámico en proporciones del 5%,10%, 15% y 20%. El curado de la pasta se hizo a temperatura ambiente durante 24 horas. El tamaño de partículas de la escoria blanca y del material cerámico fue de 150 μm. Se utilizó XDR y MEB para analizar los posibles mecanismos de formación de la andradita y del carbonato de calcio. Se fallaron las muestras en la maquina universal de ensayos. Se determinó la influencia de los compuestos químicos formados en la resistencia a la compresión. Los resultados indican que las condiciones propuestas son adecuadas para la formación estructuras cristalinas propias de los materiales geopoliméricos
Gasification studies were performed on sub-bituminous coal of the province Centro in Boyacá state of Colombia, vegetable biomass Chenopodium album (cenizo) and co-gasification of coal-biomass mixtures agglomerated with paraffin in a thermogravimetric analyzer. Biomass synergistically promoted thermochemical transformation of the coal was observed. Experimental results were compared to equilibrium composition simulations. Ash fusibility tests of the coal-biomass mixture were carried out, which allowed to clarify its behavior, such as dry or fluid ash according to own chemical composition, during the gasification process. The experimental tests allowed determining the differences in thermal decomposition, between coal, cenizo and coal-biomass blend, which are attributable to the physicochemical properties of each one solid fuel. During the tests, gas chromatography analyses were performed to establish the compositions of the syngas. The syngas obtained from biomass had the highest concentration of CO and the lowest H2; the coal and the coal-biomass mixture were slightly minor respectively. Concentrations of CH4, CO2 and C2H4 were similar between coal and biomass. This result is consistent with the higher calorific value of the coal syngas. The production of syngas from the coal-biomass mixture had the lowest contents of H2 and CO due to synergistic phenomena that occur with the fuel mixture. The co-gasification of the mixture gave the highest syngas production, carbon conversion, and thermal efficiency. These results indicate the viability of co-gasification of coal-Chenopodium album agglomerated mixtures. In gasification of non-agglomerated mixtures of coal-cenizo, the biomass can be burned directly without producing syngas.
This technological innovation project involved material identification, and design, installation, implementation, and evaluation of a pilot plant with capacity of 10 t per batch to recover materials and produce synthetic fuels (oil, syngas and solid) from shredded scrap waste. The results showed the proper way to separate materials (metals, and organic and inert compounds), and to perform the pyrolysis process to produce gas, oil, and coke as synthetic fuels from organic waste. The process started with the physicochemical characterization of the waste, followed by the selection of separation, sorting and processing technologies, and the definition of pyrolysis process parameters. Finally, the synthetic fuels were characterized, and uses for the furnace billet, ladle preheating, internal combustion engines, and auto generation were suggested. The results showed 82 % recovery of magnetic and non-magnetic metals, and production of synthetic fuels with PCI between 20 650 and 36 900 kJ/kg.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.