As a result of this research, it was established that the chlorine atom replacement rates in hexa-chlorocyclotriphosphazene by o-, m-, and p-methylanilines’ temperatures are crucial in determining which reaction is made. The speed of reaction practically does not affect the polarity of the synthesis solvent. For the formation of fully substituted o-, m-, and p-arilaminocyclotriphosphazenes, the reaction takes 5 h and is carried out in the diglyme at its boiling temperature. The structure of the synthesized AAP was confirmed by 31P and 1H NMR spectroscopy and MALDI-TOF mass spectrometry. By means of synchronous DSK and TGA, it is found that the synthesized AAP are crystalline and their thermal destruction has a stepped character. Thermal destruction is shown to be accompanied by the simultaneous removal of three aniline molecules from the AAP molecules. Conducted curing of epoxy resin DER-331 is carried out using the AAP as a curing agent. It has been established that due to steric difficulties, o- AAP does not interact with epoxy resin, unlike m- and p- AAP. The gel fraction in curing resin is measured, and the AAP relate to the stage processes of macromolecule formation. The result is that polymers based on DER-331 and m-, p-AAP have a gel fraction content up to 97 mass. %. These polymers have glass-transition temperatures 80 and 85 °C (m- and p-AAP-based, respectively) and demonstrate fire resistance to standard UL-94 of category V-0.

A novel type of phosphazene containing an additive that acts both as a catalyst and as a flame retardant for benzoxazine binders is presented in this study. The synthesis of a derivative of hexachlorocyclotriphosphazene (HCP) and meta-toluidine was carried out in the medium of the latter, which made it possible to achieve the complete substitution of chlorine atoms in the initial HCP. Thermal and flammability characteristics of modified compositions were investigated. The modifier catalyzes the process of curing and shifts the beginning of reaction from 222.0 °C for pure benzoxazine to 205.9 °C for composition with 10 phr of modifier. The additive decreases the glass transition temperature of compositions. Achievement of the highest category of flame resistance (V-0 in accordance with UL-94) is ensured both by increasing the content of phenyl residues in the composition and by the synergistic effect of phosphorus and nitrogen. A brief study of the curing kinetics disclosed the complex nature of the reaction. An accurate two-step model is obtained using the extended Prout–Tompkins equation for both steps.

A novel type of phosphazene containing additive that act both as catalyst and as flame retardant for benzoxazine binders is presented in this study. The synthesis of a derivative of hexachlorocyclotriphosphazene (HCP) and meta-toluidine was carried out in the medium of the latter, which made it possible to achieve complete substitution of chlorine atoms in the initial HCP. Thermal and flammability characteristics of modified compositions are revealed. The modifier catalyzes the process of curing and shifts the beginning of reaction from 222.0 C for pure benzoxazine to 205.9 C for composition with 10 phr of modifier. The additive decreases the glass transition temperature of compositions. Achievement of the highest category of flame resistance (V-0 in accordance with UL-94) is ensured both by increasing the content of phenyl residues in the composition and by the synergistic effect of phosphorus and nitrogen. Brief research of the curing kinetics disclosed the complex nature of the reaction. An accurate two-step model is obtained using extended Prout-Tompkins equation for both steps.

This work is devoted to the influence of phosphazene modifiers with different substituents on the curing process, thermal properties and flammability of benzoxazine resin. Novel catalysts with m-toluidine substituents were introduced. The catalytic activity of studied phosphazene compounds decreased in the row: hexachlorocyclotriphosphazene (HCP) > tetra m-toluidine substituted phosphazene PN-mt (4) > hexa m-toluidine substituted phosphazene PN-mt (6) > hexaphenoxycyclotriphosphazene (HPP), where HPP is totally inactive. Two types of catalysis: basic and acid were proposed. A brief study of resulting properties of polybenzoxazines was presented. The addition of any studied modifier caused the decrease of glass transition temperature and thermal stability of polymers. The morphology of cured compositions was characterized by matrix-dispersion phase structure. All phosphazene containing polybenzoxazines demonstrated the improved flame resistance.

No abstract