ResumoSistemas pró-degradantes fundamentados em estearatos de ferro e de manganês e o aditivo comercial d2w, fundamentado em sal orgânico de manganês, foram avaliados em filmes de polietileno de alta densidade (PEAD) em ambiente termooxidativo (estufa a 80 °C e ausência de luz). A degradação termooxidativa foi monitorada por propriedades mecânicas, espectroscopia de infravermelho e cromatografia por exclusão de tamanho. Os resultados mostram que ambos os metais aceleram a degradação termooxidativa do PEAD. Entretanto, o desempenho pró-degradante do estearato de manganês é significativamente superior ao do estearato de ferro. Para o ferro, a degradação aumenta com o aumento da concentração do metal, enquanto que o manganês apresenta valor máximo de degradação em função da concentração. O estado de oxidação do ferro não interfere no desempenho pró-degradante. O aditivo comercial d2w TM acelera, significativamente, a termooxidação do PEAD, mas seu desempenho é inferior ao estearato de manganês provavelmente em função do conjunto de estabilizantes adicionados ao produto comercial.
Palavras-chave: degradação, PEAD, estearato de ferro, estearato de manganês, pró-degradante.
AbstractThe evaluation of pro-degradant systems based on iron and manganese in the form of metallic stearate, and d2w TM commercial additive, based on organic salt of manganese, was carried out on films of high density polyethylene (HDPE) in thermal oxidative conditions (80 °C oven and absence of light). The thermo oxidative degradation was monitored by mechanical properties, by infrared spectroscopy and by size exclusion cromatography. The results show that both metals accelerate thermal oxidative degradation of HDPE. However, the pro-degrading performance of manganese is significantly higher than iron. Considering iron, the degradation increases with increasing concentration of the metal, while manganese presents the maximum value of degradation depending on the concentration. The oxidation state of iron does not interfere with pro-degrading performance. The commercial additive d2w TM significantly accelerates HDPE thermo-oxidation, but its performance is lower than manganese stearate as a function of the set of stabilizing additives to be added to the commercial product.
O Negro de fumo (NF) é muito utilizado como um aditivo fotoprotetor em polímeros termoplásticos, principalmente para o polietileno de baixa densidade (PEBD) e para o polipropileno (PP). O comportamento como estabilizante termooxidativo do negro de fumo modificado superficialmente foi estudado, completando sua caracterização como agente fotoestabilizante. A superfície do negro de fumo foi modificada através da oxidação com peróxido de hidrogênio e com ácido nítrico, a fim de aumentar o seu caráter ácido. Os resultados desta estabilização termooxidativa foram positivos para o PEBD, mas mostraram comportamento insatisfatório para o PP.
Ventricular Assist Devices are blood pumps used in patients with Congestive Heart Failure who are waiting for a heart transplant. They aim to assist the ventricle to pump out blood in physiological circulation by increasing aortic pressure and decreasing intraventricular pressure. The IFSP Laboratory of Bioengineering and Biomaterials (BIOENG) has been developing an Implantable Centrifugal Blood Pump called CARoL for mechanical circulatory support. The objective of this dissertation is to evaluate the changes in the crystallinity of the polymeric Pivot Bearings supporting the impeller of this pump when subjected to friction generated by rotation of zirconia oxide ceramic shafts. The adopted methodology consisted of submitting new and used samples of: a) bearings set made of polyamide 6; and b) the set made of poly-ether-ether-ketone. Those new and used samples were characterized by X-ray diffraction tests and Infrared Spectroscopy. The diffractograms and spectra obtained were compared to evaluate the bearing crystallinity, for both polymers before and after friction. The tests carried out showed diffractograms and similar spectra for the new and used samples, thus, there are indications that the friction generated by the rotation of the shafts did not change the crystallinity of the polymeric bearings supporting the pump rotor.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.