A key challenge hindering the mass adoption of Lithium-ion and other next-gen chemistries in advanced battery applications such as hybrid/electric vehicles (xEVs) has been management of their functional performance for more effective battery utilization and control over their life. Contemporary battery management systems (BMS) reliant on monitoring external parameters such as voltage and current to ensure safe battery operation with the required performance usually result in overdesign and inefficient use of capacity. More informative embedded sensors are desirable for internal cell state monitoring, which could provide accurate state-of-charge (SOC) and state-of-health (SOH) estimates and early failure indicators. Here we present a promising new embedded sensing option developed by our team for cell monitoring, fiber-optic

We propose a novel biomedical imaging technique, called nanodiamond imaging, that noninvasively records the three-dimensional distribution of biologically tagged nanodiamonds in vivo. Our technique performs optically detected electron spin resonance of nitrogen-vacancy centers in nanodiamonds, a nontoxic nanomaterial that is easily biologically functionalized. We demonstrate the feasibility of the technique by imaging multiple nanodiamond targets within pieces of chicken breast; it is the first demonstration of imaging within scattering tissue by optically detected magnetic resonance. We achieve a sensitivity equivalent to 740 pg of nanodiamond in 100 s of measurement time and a spatial resolution of 800 μm over a 1 cm(2) field of view, and we show how the technique has the potential to yield images with combined high sensitivity (∼100 fg nanodiamond) AND high spatial resolution (∼100 μm) over organism-scale fields of view, features which are mutually exclusive in existing imaging modalities except at the shallowest imaging depths.

A key challenge hindering the mass adoption of Lithium-ion and other next-gen chemistries in advanced battery applications such as hybrid/electric vehicles (xEVs) has been management of their functional performance for more effective battery utilization and control over their life. Contemporary battery management systems (BMS) reliant on monitoring external parameters such as voltage and current to ensure safe battery operation with the required performance usually result in overdesign and inefficient use of capacity. More informative embedded sensors are desirable for internal cell state monitoring, which could provide accurate state-of-charge (SOC) and state-of-health (SOH) estimates and early failure indicators. Here we present a promising new embedded sensing option developed by our team for cell monitoring, fiber-optic sensors. High-performance large-format pouch cells with embedded fiber-optic sensors were fabricated. This second part of the paper focuses on the internal signals obtained from these FO

A novel hyperspectral imaging system has been developed that takes advantage of the tunable path delay between orthogonal polarization states of a liquid crystal variable retarder. The liquid crystal is placed in the optical path of an imaging system and the path delay between the polarization states is varied, causing an interferogram to be generated simultaneously at each pixel. A data set consisting of a series of images is recorded while varying the path delay; Fourier transforming the data set with respect to the path delay yields the hyperspectral data-cube. The concept is demonstrated with a prototype imager consisting of a liquid crystal variable retarder integrated into a commercial 640x480 pixel CMOS camera. The prototype can acquire a full hyperspectral data-cube in 0.4 s, and is sensitive to light over a 400 nm to 1100 nm range with a dispersion-dependent spectral resolution of 450 cm(-1) to 660 cm(-1). Similar to Fourier transform spectroscopy, the imager is spatially and spectrally multiplexed and therefore achieves high optical throughput. Additionally, the common-path nature of the polarization interferometer yields a vibration-insensitive device. Our concept allows for the spectral resolution, imaging speed, and spatial resolution to be traded off in software to optimally address a given application. The simplicity, compactness, potential low cost, and software adaptability of the device may enable a disruptive class of hyperspectral imaging systems with a broad range of applications.

Activation improvement of ion implanted boron in silicon through fluorine co-implantation J.Single dopant atoms can affect transport properties in scaled semiconductor devices and coherent control of spin and charge degrees of freedom of single dopant atoms promises to enable quantum computing. The authors report on an improved technique for deterministic placement of single dopant atoms by single ion implantation with scanning probe alignment. Ions are generated in a microwave driven ion source, mass analyzed in a Wien filter, and impinge on spin readout devices after alignment of the ion beam to regions of interest with a noncontact scanning force microscope.

Abstract. Nanodiamond imaging is a new molecular imaging modality that takes advantage of nitrogen-vacancy (NV) centers in nanodiamonds to image a distribution of nanodiamonds with high sensitivity and high spatial resolution. Since nanodiamonds are nontoxic and are easily conjugated to biomolecules, nanodiamond imaging can potentially elicit physiological information from within a living organism. The position of the nanodiamonds is measured using optically detected electron spin resonance of the NVs. In a previous paper, we described a proof-of-principle nanodiamond imaging system with the ability to image in two dimensions over a 1 × 1 cm field of view and demonstrated imaging within scattering tissue. Here, we describe a second-generation nanodiamond imaging system with a field of view of 30 × 200 mm, and with three-dimensional imaging potential. The new system has a comparable spatial resolution of 1.2 mm FWHM and a sensitivity (in terms of the concentration of carbon atoms in a mm 3 voxel) of 1.6 mM mm 3 Hz −1∕2 , a 3-dB improvement relative to the old system. We show that imaging at 2.872 GHz versus imaging at 2.869 GHz offers a 1.73× improvement in sensitivity with only a 20% decrease in resolution and motivate this by describing the observed lineshape starting from the NV spin Hamiltonian.

No abstract

No abstract