Global acquisition of atmospheric wind profiles using a spaceborne direct-detection Doppler wind lidar is being accomplished following the launch of European Space Agency’s Aeolus mission. One key part of the instrument is a single-frequency, ultraviolet laser that emits nanosecond pulses into the atmosphere. High output energy and frequency stability ensure a sufficient signal-to-noise ratio of the backscatter return and an accurate determination of the Doppler frequency shift induced by the wind. This Letter discusses the design of the laser transmitter for the first Doppler wind lidar in space and its performance during the first year of the Aeolus mission, providing valuable insights for upcoming space lidar missions.

No abstract

ESAs Earth Explorer Aeolus was launched in August 2018. Aboard the first spaceborne wind lidar ALADIN (Atmospheric LAser Doppler INstrument) was switched on in early September 2018 and demonstrated the capability to provide atmospheric wind profiles globally from particle and molecular backscatter. In doing so, it will contribute to the improvement in numerical weather prediction (NWP) and the understanding of global dynamics. At the same, it is a major step for powerful and frequency stabilized ultraviolet (UV) lasers for space applications. In parallel, ESA and its partners continue the development of this technology by setting up further ground tests based on Aeolus, and preparing the next milestone with ATLID (ATmospheric LIDar) for the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) mission. ATLID is currently fully integrated and getting prepared for its on-ground testing.

Reliable, long term operation of high-power laser systems in the Earth orbit is not a straightforward task as the space environment entails various risks for optical surfaces and bulk materials. The increased operational risk is, among others, due to the presence of high energy radiation penetrating the metallic shielding of satellites and inducing absorption centers in the bulk of optical components, and vacuum exposure which can deteriorate coating performance. Comprehensive testing for analyzing high-energy radiation effects and mitigation procedures were performed on a set of frequency conversion crystals and are discussed in this paper. In addition to a general resistance to space environmental effects, the frequency conversion crystals were subjected to a comparative analysis on optimum third harmonic efficiency, starting from pulsed 1064 nm laser radiation, with the goal of exceeding a value of 30 %. Concomitant modeling supported the selection of crystal parameters and the definition of crystal dimensions.

No abstract

No abstract

No abstract

No abstract