Bioprinting is a process based on additive manufacturing from materials containing living cells. These materials, often referred to as bioink, are based on cytocompatible hydrogel precursor formulations, which gel in a manner compatible with different bioprinting approaches. The bioink properties before, during and after gelation are essential for its printability, comprising such features as achievable structural resolution, shape fidelity and cell survival. However, it is the final properties of the matured bioprinted tissue construct that are crucial for the end application. During tissue formation these properties are influenced by the amount of cells present in the construct, their proliferation, migration and interaction with the material. A calibrated computational framework is able to predict the tissue development and maturation and to optimize the bioprinting input parameters such as the starting material, the initial cell loading and the construct geometry. In this contribution relevant bioink properties are reviewed and discussed on the example of most popular bioprinting approaches. The effect of cells on hydrogel processing and vice versa is highlighted. Furthermore, numerical approaches were reviewed and implemented for depicting the cellular mechanics within the hydrogel as well as for prediction of mechanical properties to achieve the desired hydrogel construct considering cell density, distribution and material-cell interaction.

Biofabrication aims to fabricate biologically functional products through bioprinting or bioassembly (Groll et al 2016 Biofabrication 8 013001). In biofabrication processes, cells are positioned at defined coordinates in three-dimensional space using automated and computer controlled techniques (Moroni et al 2018 Trends Biotechnol. 36 384–402), usually with the aid of biomaterials that are either (i) directly processed with the cells as suspensions/dispersions, (ii) deposited simultaneously in a separate printing process, or (iii) used as a transient support material. Materials that are suited for biofabrication are often referred to as bioinks and have become an important area of research within the field. In view of this special issue on bioinks, we aim herein to briefly summarize the historic evolution of this term within the field of biofabrication. Furthermore, we propose a simple but general definition of bioinks, and clarify its distinction from biomaterial inks.

Investigations into the structuring by two-photon polymerization of a nonshrinking, photosensitive, zirconium sol-gel material are presented. This hybrid material can be photostructured even when it contains up to 30 mol % of zirconium propoxide (ZPO); by varying the material's inorganic content, it is possible to modify and tune its refractive index. The introduction of ZPO significantly increases the photosensitivity of the resulting photopolymer. The fabricated three-dimensional photonic crystal structures demonstrate high resolution and a clear band-stop in the near-IR region. In contrast to common practice, no additional effort is required to precompensate for shrinkage or to improve the structural stability of the fabricated photonic crystals; this, combined with the possibility of tuning this material's optical, mechanical, and chemical properties, makes it suitable for a variety of applications by two-photon polymerization manufacturing.

In the present work, 3D CAD scaffolds for tissue engineering applications were developed starting from methacrylamide-modified gelatin (GelMOD) using two-photon polymerization (2PP). The scaffolds were cross-linked employing the biocompatible photoinitiator Irgacure 2959. Because gelatin is derived from collagen (i.e., the main constituent of the ECM), the developed materials mimic the cellular microenvironment from a chemical point of view. In addition, by applying the 2PP technique, structural properties of the cellular microenvironment can also be mimicked. Furthermore, in vitro degradation assays indicated that the enzymatic degradation capability of gelatin is preserved for the methacrylamide-modified derivative. An in depth morphological analysis of the 2PP-fabricated scaffolds demonstrated that the parameters of the CAD model are reproduced with great precision, including the ridge-like surface topography on the order of 1.5 μm. The developed scaffolds showed an excellent stability in culture medium. In a final part of the present work, the suitability of the developed scaffolds for tissue engineering applications was verified. The results indicated that the applied materials are suitable to support porcine mesenchymal stem cell adhesion and subsequent proliferation. Upon applying osteogenic stimulation, the seeded cells differentiated into the anticipated lineage. Energy dispersive X-ray (EDX) analysis showed the induced calcification of the scaffolds. The results clearly indicate that 2PP is capable of manufacturing precisely constructed 3D tissue engineering scaffolds using photosensitive polymers as starting material.

Over the recent decades gelatin has proven to be very suitable as an extracellular matrix mimic for biofabrication and tissue engineering applications. However, gelatin is prone to dissolution at typical cell culture conditions and is therefore often chemically modified to introduce (photo-)crosslinkable functionalities. These modifications allow to tune the material properties of gelatin, making it suitable for a wide range of biofabrication techniques both as a bioink and as a biomaterial ink (component).The present review provides a non-exhaustive overview of the different reported gelatin modification strategies to yield crosslinkable materials that can be used to form hydrogels suitable for 2 biofabrication applications. The different crosslinking chemistries are discussed and classified according to their crosslinking mechanism including chain-growth and step-growth polymerization.The step-growth polymerization mechanisms are further classified based on the specific chemistry including different (photo-)click chemistries and reversible systems. The benefits and drawbacks of each chemistry are also briefly discussed. Furthermore, focus is placed on different biofabrication strategies applying inkjet, deposition and light-based additive manufacturing techniques, and the applications of the obtained 3D constructs.

The natural extracellular matrix (ECM) represents a complex and dynamic environment. It provides numerous spatio‐temporal signals mediating many cellular functions including morphogenesis, adhesion, proliferation and differentiation. The cell–ECM interaction is bidirectional. Cells dynamically receive and process information from the ECM and remodel it at the same time. Theses complex interactions are still not fully understood. For better understanding, it is indispensable to deconstruct the ECM up to the point of investigating isolated characteristics and cell responses to physical, chemical and topographical cues. Two‐photon polymerization (2PP) allows the exact reconstruction of cell specific sites in 3D at micro‐ and nanometer precision. Processing biocompatible synthetic and naturally‐derived hydrogels, the microenvironment of cells can be designed to specifically investigate their behavior in respect to key chemical, mechanical and topographical attributes. Moreover, 3D manipulation can be performed in the presence of cells, guiding biological tissue formation in all stages of its development. Here, advances in 2PP microfabrication of synthetic and naturally based hydrogels are reviewed. Key components of photopolymerizable hydrogel precursors, their structure–property relationships and their polymerization mechanisms are presented. Furthermore, it is shown how biocompatible 2PP fabricated constructs can act as biologically relevant matrices to study cell functions and tissue development.

One of the most promising approaches in tissue engineering is the application of 3D scaffolds, which provide cell support and guidance in the initial tissue formation stage. The porosity of the scaffold and internal pore organization influence cell migration and play a major role in its biodegradation dynamics, nutrient diffusion and mechanical stability. In order to control cell migration and cellular interactions within the scaffold, novel technologies capable of producing 3D structures in accordance with predefined design are required. The two-photon polymerization (2PP) technique, used in this report for the fabrication of scaffolds, allows the realization of arbitrary 3D structures with submicron spatial resolution. Highly porous 3D scaffolds, produced by 2PP of acrylated poly(ethylene glycol), are seeded with cells by means of laser-induced forward transfer (LIFT). In this laser printing approach, a propulsive force, resulting from laser-induced shock wave, is used to propel individual cells or cell groups from a donor substrate towards the receiver substrate. We demonstrate that with this technique printing of multiple cell types into 3D scaffolds is possible. Combination of LIFT and 2PP provides a route for the realization of 3D multicellular tissue constructs and artificial ECM engineered on the microscale.

The natural cell environment is characterised by complex three-dimensional structures, which contain features at multiple length scales. Many in vitro studies of cell behaviour in three dimensions rely on the availability of artificial scaffolds with controlled three-dimensional topologies. In this paper, we demonstrate fabrication of three-dimensional scaffolds for tissue engineering out of poly(ethylene glycol) diacrylate (PEGda) materials by means of two-photon polymerization (2PP). This laser nanostructuring approach offers unique possibilities for rapid manufacturing of three-dimensional structures with arbitrary geometries. The spatial resolution dependence on the applied irradiation parameters is investigated for two PEGda formulations, which are characterized by molecular weights of 302 and 742. We demonstrate that minimum feature sizes of 200 nm are obtained in both materials. In addition, an extensive study of the cytotoxicity of the material formulations with respect to photoinitiator type and photoinitiator concentration is undertaken. Aqueous extracts from photopolymerized PEGda samples indicate the presence of water-soluble molecules, which are toxic to fibroblasts. It is shown that sample aging in aqueous medium reduces the cytotoxicity of these extracts; this mechanism provides a route for biomedical applications of structures generated by 2PP microfabrication and photopolymerization technologies in general. Finally, a fully biocompatible combination of PEGda and a photoinitiator is identified. Fabrication of reproducible scaffold structures is very important for systematic investigation of cellular processes in three dimensions and for better understanding of in vitro tissue formation. The results of this work suggest that 2PP may be used to polymerize poly(ethylene glycol)-based materials into three-dimensional structures with well-defined geometries that mimic the physical and biological properties of native cell environments.