Over the recent decades gelatin has proven to be very suitable as an extracellular matrix mimic for biofabrication and tissue engineering applications. However, gelatin is prone to dissolution at typical cell culture conditions and is therefore often chemically modified to introduce (photo-)crosslinkable functionalities. These modifications allow to tune the material properties of gelatin, making it suitable for a wide range of biofabrication techniques both as a bioink and as a biomaterial ink (component).The present review provides a non-exhaustive overview of the different reported gelatin modification strategies to yield crosslinkable materials that can be used to form hydrogels suitable for 2 biofabrication applications. The different crosslinking chemistries are discussed and classified according to their crosslinking mechanism including chain-growth and step-growth polymerization.The step-growth polymerization mechanisms are further classified based on the specific chemistry including different (photo-)click chemistries and reversible systems. The benefits and drawbacks of each chemistry are also briefly discussed. Furthermore, focus is placed on different biofabrication strategies applying inkjet, deposition and light-based additive manufacturing techniques, and the applications of the obtained 3D constructs.

Two‐photon polymerization (2PP) is a lithography‐based 3D printing method allowing the fabrication of 3D structures with sub‐micrometer resolution. This work focuses on the characterization of gelatin–norbornene (Gel–NB) bioinks which enables the embedding of cells via 2PP. The high reactivity of the thiol‐ene system allows 2PP processing of cell‐containing materials at remarkably high scanning speeds (1000 mm s−1) placing this technology in the domain of bioprinting. Atomic force microscopy results demonstrate that the indentation moduli of the produced hydrogel constructs can be adjusted in the 0.2–0.7 kPa range by controlling the 2PP processing parameters. Using this approach gradient 3D constructs are produced and the morphology of the embedded cells is observed in the course of 3 weeks. Furthermore, it is possible to tune the enzymatic degradation of the crosslinked bioink by varying the applied laser power. The 3D printed Gel–NB hydrogel constructs show exceptional biocompatibility, supported cell adhesion, and migration. Furthermore, cells maintain their proliferation capacity demonstrated by Ki‐67 immunostaining. Moreover, the results demonstrate that direct embedding of cells provides uniform distribution and high cell loading independently of the pore size of the scaffold. The investigated photosensitive bioink enables high‐definition bioprinting of well‐defined constructs for long‐term cell culture studies.

A cleavable, biocompatible diazosulfonate two-photon initiator (2PI) was developed overcoming limitations caused by the toxicity of state-of-the-art bimolecular 2PIs.