В роботі запропоновано удосконалення моделі Арреніуса, на основі якої проаналізовано залежності пожежобезпечного терміну експлуатації ізоляції кабельних виробів від напруженості електричного поля та температури, при цьому напруженість електричного поля та температуру представлено як випадкові величини.
Optical location deals with issues of particular practical importance, one of them is the task of reduction of observability of objects in optical span of wavelengths. This problem has an application in the military science, as well as in many other branches [ 11. One of the ways of reducing efficiency of using locators with laser sounding of targets is the utilization of the diffraction-reflective coverings. The main point of using them is the redistribution of the energy of the scattered radiation in space, that is transfer from uniform dispersion, described in Lambert's law, to appreciably non-uniform dispensing, which is typical for light-reflection on gitter. It is obvious that in this case we are able to gain either considerable reduction of the capacity of the signal, reflected from the target, which leads to diminution of the distance of object detection, or considerable augmentation, which means appreciable overload of the receiving apparatus, its temporary dazzle, which may cause a breakdown in the operating mode of the system.The dispensing of the intensity when the light is reflected from DRC represents a gitter and is expressed by the formula [ 2 ] : 1 = Io/N2.sin2u/u2.sin2(N.v)/sin2v, where 10 -the incident intensity; N -the number of dashes of a gitter. Here u=n.a.(siny+sincp)/h, where athe breadth of the effective facet of a dash; h -the wavelength; cp -the diffraction angle; y i -the light angle; and v=n.d.(sinW+sincp)/h, where d -the constant of a gitter.The analysis of this proportion shows that when the parameters are selected appropriately, a gitter allows to form downward excursions in the diagram of scattered radiation directivity up to zero datum and to "withdraw" the principal maximum, which may be the only one by far from the direction of probing radiation. This situation is the most advantageous from the point of view of reducing observability, as in overwhelming majority of the cases of using the systems of detection, the direction of laser sounding of the target and the receiving system's location in space are rather close.For the firther investigations of the characteristics of scattered radiation when reflecting from the real diffractional coverings manufactured industrially, as well as for the analysis of the dispersion behaviour on the objects with the complicated shape of the surface, a facility based on the ordinary goniophotometer using laser LG-113 working in multimode regime on the wave-length of 0,63 mkm has been created. EMP-28 was used as a photoreceiver, and the meterings at the large span of fluctuating of the intencity of the receiving signal were taken with the help of the calibrated light filters. Flat bidimensional film-type holographic array applied to the substrate of pnotographic paper was used as diffraction-reflective covering. Initially spacial dispensing at the side of DRC-less specimen was experimentally investigated. The results of the measurings are represented on fig. 1 by dependency 1 and are close to Lambert's dispensing. Then the specimen was turned to ...
The article substantiates the need to improve the existent methods of combat defense and combat equipment (DAM) against bombs (guided combat munitions from UAVs, stray combat munitions, etc.)with semi-active laser targeting systems (LSA) on the basis of controlled reflective coatings. Methods of management the diffraction of optical radiation on reflecting coatings are based on applications in coating materials. At the same time, the reflecting properties can be purposefully changed by applying acousto-optical, electro-optical and thermos-optical effects. The acousto-optic method of diffraction control involves the spatial modulation of the beating coefficient in the medium, which is carried out by ultrasonic (acoustic) waves. During the distribution of ultrasound in the reflective coverage (areas of compression and discharge of the material of the waves distribution) appears in the reflective coverage. A purposeful change of descriptions of the acoustic wave leads to the possibility of forming the reflecting phase grating with a given parameter on which it will diffract a radiation. The electro-optical method of management the diffraction of laser radiation is based on the phenomenon of induced anisotropy of media under the influence of a field (electro-optical effect). However, the creation of reflective diffractive elements (coatings)using the electro-optical effect is limited by a number of disadvantages of this method. The thermo-optical method of management light diffraction consists in changing the optical constants of reflective coatings under the influence of temperature. On the basis of the multilayer interference systems (MLIS) with tapes, peak and phase diffraction gratings can be implemented. The use of MLIS coatings with ribbons in the display allows you to implement the functions of selecting and unlocking coatings in the infrared range. The last two methods are of the greatest practical interest since, unlike, the electron-beam method they allow heating a fairly large surface area of the coating. The implementation of diffraction control of optical radiation on the reflective coatings of DAM samples will allow to remove the ammunition control system with semi-active LSA from the working state as a result of the aiming point fluctuation.
Встановлені особливості визначення класів і розмірів вибухонебезпечних зон, що створюються газо- пароповітряним вибухонебезпечним середовищем навколо зовнішніх установок. Національна класифікація вибухонебезпечних зон здійснюється двома методами, один з яких є детермінованим, а другий – розрахунковим. Газо- пароповіряне вибухонебезпечне середовище може утворювати вибухонебезпечні зони класів 0, 1, 2. Для розрахункового методу вихідними параметрами є кліматичні умови, властивості небезпечні речовин, ступінь витоку та рівень вентиляції. Визначається інтенсивність витоку небезпечної речовини, розраховуються гіпотетичний об’єм вибухонебезпечного середовища, якій порівнюється з фіксованим значенням загального об’єму, що вентилюється. Гіпотетичний об’єм та час існування вибухонебезпечного середовища залежать від швидкості вітру за гіперболічним законом. На прикладі зовнішньої установки у вигляді негерметичної муфти надземного газопроводу природного газу показано, що швидкість вітру оказує суттєвий вплив на величину гіпотетичного об’єму вибухонебезпечного середовища. При швидкості, що відповідає за шкалою Бофорта тихому вітру, навколо зовнішньої установки створюється вибухонебезпечна зона класу 1. При швидкості, що відповідає за шкалою Бофорта легкому вітру, створюється вибухонебезпечна зона класу 2. Зниження температури навколишнього середовища призводить до зменшення величини гіпотетичного об’єму вибухонебезпечного середовища. Інтенсивність витоку небезпечної речовини суттєво впливає на клас вибухонебезпечної зони. Для кожного виду небезпечної речовини необхідно визначати граничне значення інте-нсивності витоку, вище якої має місце вибухонебезпечна зона класу 1, а нижче – класу 2. Час існування вибухонебезпечного середовища не залежить від температури навколишнього середовища й інтенсивності витоку та швидко зменшується зі збільшенням швидкості вітру
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.