A strong focus in the development of modern aircraft engines is the reduction of the engine tonal core noise. For the development of efficient noise reduction techniques, a detailed understanding of the sound transmission throughout all turbomachinery components of the engine is mandatory. In this paper an excitation system is developed to generate turbomachinery-specific sound fields by controlling their circumferential and radial mode order. The excitation system consists of two rows of eight loudspeakers distributed circumferentially around the outer duct wall. This paper gives a detailed description of the analytically- and numerically-supported design methodology of an optimized excitation system, as well as an optimized microphone array mounted flush with the outer duct wall. A sensitivity analysis of the loudspeaker array and of the microphone array with respect to distance and frequency is then carried out numerically. To analyze the microphone signals and to deconstruct the propagating sound field into its modal components, a Radial Mode Analysis (RMA) is carried out. To ensure high-quality RMA results, the axial distribution of the microphones is optimized with respect to the condition number of the array’s transfer matrix. The procedure explained in this paper shall help guide the development of acoustic excitation and microphone array systems for experiments to better understand sound propagation in turbomachinery and flow ducts.
A detailed understanding of the sound propagation and transmission within the engine and adjacent ducts is mandatory for the development of efficient noise reduction techniques for the tonal sound field produced by the turbomachinery components of aircraft engines. For this purpose, experimental acoustic investigations are needed. In the first part of this paper, an acoustic excitation system for the generation of acoustic spinning modes with circumferential mode order one and varying radial mode order, as well as a microphone array optimized for a radial decomposition of the sound field have been systematically designed. To verify the excitation method and the design of the excitation system, corresponding experimental measurements are carried out in an acoustic wind tunnel. Amongst others, the sound power of the specific excited acoustic modes of order (1,0) and (1,1) are compared with the respective powers achieved with a non-specific sound field excitation. To test the range of flexible use of the sound generator, measurements are carried out over a wide frequency range. It is shown that the intended modes can be controlled at the design frequency of the sound generator as well as off-design frequencies. However, the dominance of the excited modes strongly depends on the number of cut-on modes and the excitation frequency as non-linear resonance effects may interfere. Furthermore, the benefit of an increased number of loudspeaker rows for stable mode excitation is discussed. The experimental results are supported by numerical simulations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.