SUMMARYThe commercial development and current economic incentives associated with energy storage using redox flow batteries (RFBs) are summarised. The analysis is focused on the all-vanadium system, which is the most studied and widely commercialised RFB. The recent expiry of key patents relating to the electrochemistry of this battery has contributed to significant levels of commercialisation in, for example, Austria, China and Thailand, as well as pilot-scale developments in many countries. The potential benefits of increasing battery-based energy storage for electricity grid load levelling and MW-scale wind/solar photovoltaic-based power generation are now being realised at an increasing level. Commercial systems are being applied to distributed systems utilising kW-scale renewable energy flows. Factors limiting the uptake of all-vanadium (and other) redox flow batteries include a comparatively high overall internal costs of $217 kW −1 h −1 and the high cost of stored electricity of ≈ $0.10 kW −1 h −1 . There is also a low-level utility scale acceptance of energy storage solutions and a general lack of battery-specific policy-led incentives, even though the environmental impact of RFBs coupled to renewable energy sources is favourable, especially in comparison to natural gas-and diesel-fuelled spinning reserves. Together with the technological and policy aspects associated with flow batteries, recent attempts to model redox flow batteries are considered. The issues that have been addressed using modelling together with the current and future requirements of modelling are outlined.

a b s t r a c tA transient modelling framework for a vanadium redox-flow battery (RFB) is developed and experiments covering a range of vanadium concentration and electrolyte flow rate are conducted. The two-dimensional model is based on a comprehensive description of mass, charge and momentum transport and conservation, and is combined with a global kinetic model for reactions involving vanadium species. The model is validated against the experimental data and is used to study the effects of variations in concentration, electrolyte flow rate and electrode porosity. Extensions to the model and future work are suggested.

Redox flow batteries (RFBs) have emerged as prime candidates for energy storage on the medium and large scales, particularly at the grid scale. The demand for versatile energy storage continues to increase as more electrical energy is generated from intermittent renewable sources. A major barrier in the way of broad deployment and deep market penetration is the use of expensive metals as the active species in the electrolytes. The use of organic redox couples in aqueous or nonaqueous electrolytes is a promising approach to reducing the overall cost in long-term, since these materials are low-cost and abundant. The performance of such redox couples can be tuned by modifying their chemical structure. In recent years, significant developments in organic redox flow batteries has taken place, with the introduction of new groups of highly soluble organic molecules, capable of providing a cell voltage and charge capacity comparable to conventional metal-based systems. This review summarises the fundamental developments and characterization of organic redox flow batteries from both the chemistry and materials perspectives. The latest advances, future challenges and opportunities for further development are discussed. Metal deposition or anode in one half-celli.e. Lithium/ organic hybrid FB Metal 'This review'

No abstract