No abstract

No abstract

Novel type hydrogel‐clay nanocomposites based on the acrylamide (AAm)‐ 2‐acrylamido‐ 2‐methylpropane sulfonic acid (AMPS) sodium salt and clay were synthesized via in situ copolymerization in aqueous solution. Samples were characterized by determining total basic group (TGB) content and swelling degree, XRD analysis, and FTIR spectroscopy. Effects of monomer ratio and clay amount on the swelling properties of the samples were investigated. It was found that the hydrogel/clay nanocomposites exhibited improved swelling capacity compared with the hydrogels. Samples were used to remove heavy metal ions (Cu (II), Cd (II), and Pb (II)) from aqueous solution in competitive and non‐competitive conditions for the first time. The effects of time and pH of the initial metal ion solution on the adsorption capacity were investigated and selectivity properties of the samples were evaluated. It was found that incorporation of a low amount of clay (10% (wt)) into the polymer structure increased the heavy metal ion adsorption capacity of the sample. It was concluded that the AAm‐AMPS/clay nanocomposites could be used as novel type, fast‐responsive, and high capacity sorbent materials in heavy metal removing processes. Copyright © 2007 John Wiley & Sons, Ltd.

No abstract

No abstract

In this study, cold and melt crystallization behaviors of amorphous poly(ethylene terephthalate) (PET)/clay nanocomposites were investigated. Two nanocomposite samples with the same amount of inorganic content were prepared by melt processing using natural montmorillonite (Na‐MMT) and organo‐modified montmorillonite (org‐MMT). Depending on the clay structure, clay dispersion into PET and crystallization behavior of the samples were studied using X‐ray diffraction and differential scanning calorimetry methods, respectively. Effects of clay structure and organic groups between clay layers in org‐MMT on the melt crystallization kinetics of the samples were analyzed with various kinetic models, namely, the Ozawa, Avrami modified by Jeziorny, and Liu‐Mo. Crystallization activation energies of the samples were also determined by the Kissinger and Augis–Bennett models. Exfoliated structures were obtained in the nanocomposite samples prepared with both the Na‐MMT and org‐MMT. From the kinetics study, it was found that the melt‐crystallization rate of the sample prepared with the Na‐MMT was higher than that prepared with the org‐MMT at a given cooling rate. It can be concluded that organic ammonium groups in the org‐MMT decelerate the crystallization rate of PET chains possibly by affecting the chain diffusion and folding. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers

No abstract

In this study, melt-crystallization behaviors of poly(butylene terephthalate) (PBT) composites including different types of inorganic fillers were investigated. Composite samples having 5 wt % of fillers were prepared by melt processing in a twin screw extruder using commercial grades of calcite (CA), halloysite (HL), and organomontmorillonite (OM) as filler. Depending on the filler type and geometry, crystallization kinetics of the samples was studied by differential scanning calorimetry (DSC) methods. Effect of filler type on the nonisothermal meltcrystallization kinetics of the PBT was analyzed with various kinetic models, namely, the Ozawa, Avrami modified by Jeziorny and Liu-Mo. Crystallization activation energies of the samples were also determined by the Kissinger, Takhor, and Augis-Bennett models. From the kinetics study, it was found that the melt-crystallization rates of the samples including CA and HL-nanotube were higher than PBT at a given cooling rate. On the other hand, it was also found that organo-montmorillonite reduced the melt-crystallization rate of PBT. It can be concluded that organic ammonium groups in the OM decelerate the crystallization rate of PBT chains possibly due to affecting the chain diffusion through growing crystal face and folding. This study shows that introducing organically modified alumina-silicate layers into the PBT-based composites could significantly reduce the production rate of the injection molded parts during the processing operations. V C 2011Wiley Periodicals, Inc. J Appl Polym Sci 123: [77][78][79][80][81][82][83][84][85][86][87][88][89][90][91] 2012