No abstract

In this study, the sorption behavior of synthetic (Analcime) zeolites with respect to nitrate ions has been studied in order to consider its application to purity ground water. Analcime or also can be called analcite (“weak”) is a kind of grey, white or colorless tectosilicates minerals. It is hydrated sodium aluminum silicates which exist in cubic form in crystalline. Analcime was successively synthesized from kaolinite as a raw material using the fusion with NaOH method. The conditions of hydrothermal crystallization (zeolitization) were found to be at temperature of 170 C˚, and time span between 36 h and 72 h for kaoline with the molar composition of 6Na2O: 0.75Al2O3:30SiO2. 780H2O.The synthetic materials have been characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), thermo gravimetric (DTA/TGA) analysis and Surface area and porosity of synthesized analcime .The results indicate that the crystallization of analcime not affected by the hydrothermal reaction time. Also analcime was tested as adsorbents for the removal of nitrate ions from the ground water samples from Wadi El-Assiuti – Egypt .The adsorption capacities of nitrate ions by analcime, as a function of its concentration, were determined at room temperature by varying analcime concentration for each water samples. During the process, all the other parameters (pH and contact time) were kept constant with respect to the initial concentration of nitrate ions in the water samples. It was found analcime has good removal efficiency obtained at pH 6-7.6, adsorbent dosage 10-12 g/L, and contact time 60 min. The Langmuir constants model for NO3 − ion sorption on the adsorption isotherms is fitted well. The RL value in the present investigation was equal or less than one, indicating that the adsorption of NO3 −ion by analcime is favorable.

No abstract

Monitoring of water retention behavior in soils is an essential process to schedule irrigation. To this end, soil moisture tensiometers usually equipped with mechanical manometers provide an easy and cost-effective monitoring of tension in unsaturated soils. Yet, periodic manual monitoring of many devices is a tedious task hindering the full exploitation of soil moisture tensiometers. This research develops and lab validates a low cost IoT soil moisture tensiometer. The IoT-prototype is capable of measuring tension up to −80 Kpa with R2 = 0.99 as compared to the same tensiometer equipped with a mechanical manometer. It uses an ESP32 MCU, BMP180 barometric sensor and an SD card module to upload the measured points to a cloud service platform and establishes an online soil water potential curve. Moreover, it stores the reading on a micro-SD card as txt file. Being relatively cheap (76 USD) the prototype allows for more extensive measurements and, thus, for several potential applications such as soil water matric potential mapping, precision irrigation, and smart irrigation scheduling. In terms of energy, the prototype is totally autonomous, using a 2400 mAh Li-ion battery and a solar panel for charging, knowing that it uses deep sleep feature and sends three data points to the cloud each 6 h.

No abstract