AbstrakPenelitian ini bertujuan untuk melakukan monitoring kualitas air di tambak budidaya udang vaname, membandingkan efektivitas penerapan budidaya dengan sistem pemeliharaan berbeda pada tambak dan variasi pemberian pakan. Pada kegiatan ini, empat tambak budidaya digunakan sebagai tempat pembesaran udang vaname (Litopenaeus vannamei). Parameter yang diukur meliputi parameter fisika dan kimia yaitu suhu, kecerahan, pH, oksigen terlarut, salinitas, amonia, dan alkalinitas; sedangkan performa pertumbuhan organisme budidaya dilihat dengan cara menghitung tingkat kelulushidupan (survival rate) udang pada akhir pemeliharaan, efisiensi konsumsi pakan melalui perhitungan FCR, dan laju pertumbuhan spesifik udang (SGR) dengan menghitung ABW (Average Body weight) dan ADG (Average Daily Growth) udang. Hasil penelitian menunjukan bahwa secara keseluruhan kisaran kualitas air yang diperoleh masih dalam keadaan layak untuk kegiatan budidaya dan bahkan Tambak 3 dan 4 menunjukkan kisaran optimum untuk kualitas air budidaya, sedangkan untuk parameter performa pertumbuhan, pada Tambak 3 dan 4 diperoleh nilai SR lebih dari 80 %, dan Tambak 1 dan 2 mempunyai SR di bawah 70 %. Selain itu, nilai FCR berada di bawah 1.7 pada tambak 3 dan 4, sedangkan pada Tambak 1 dan 2 nilainya lebih dari 1.7. Terakhir untuk nilai SGR, Tambak 3 dan 4 juga menunjukkan presentasi yang bagus jika dibandingkan Tambak 1 dan 2. Secara komprehensif, dapat disimpulkan bahwa penerapan sistem pemeliharaan dengan menggunakan sistem flok pada Tambak 3 dan 4 meningkatkan performa kualitas air dan hasil produksi dibandingkan pada Tambak 1 dan 2. AbstractThe aim of this study was to monitor water quality in vaname culture pond and compare the application of different rearing culture system and feeding variations. Four ponds culture were used as vaname (Litopenaeus vannamei) growth place. Measured parameters include physical and chemical factors such as temperature,brightness, pH, DO, salinity, ammonia, and alkalinity, while growth shrimp performance showed by SGR, SR and FCR. The research result of the water quality parameters show an adequate range values for all of the ponds and good enough for shrimp growth, and especially an optimum range value presented in pond three and four. Survival rate (SR) both pond 3 and 4 exhibit a good presentation that is more than 80%, whereas pond 1 and 2 were just less than 70% of SR value. The specific growth rate (SGR) presents also a good presentation in Pond 3 and 4 rather than pond 1 and 2. Based on the feed consumption, pond 1 and 2 show high FCR that is more than 1.7 while pond 3 and 4 present smaller FCR value which is less than 1.7. Finally, it could be concluded that application of floc in culture rearing system of pond 3 and 4 increase water quality and production value than pond 1 and 2.
PT. XYZ adalah perusahaan manufaktur yang memproduksi alat mesin-mesin industri kecil dan menengah. Manusia sebagai bagian dari sistem kerja memiliki kelebihan serta keterbatasan dalam menjalankan perannya dalam sistem kerja. Perhatian penelitian ini berfokus pada divisi perakitan bagian pendukung power thresher di PT. XYZ, dimana kegiatan kerjanya masih dilakukan secara manual, dengan permasalahan yaitu kelelahan yang ditimbulkan setelah bekerja dan postur tubuh yang berbahaya. Penelitian ini menggunakan metode Swedish Occuptional Fatigue Index (SOFI) sebagai alat ukur keluhan subyektif yang dirasakan pekerja dan metode Ovako Work Posture Analysis System (OWAS) untuk mengevaluasi serta menganalisis sikap kerja saat melakukan aktivitas kerja. Berdasarkan hasil pengolahan data dan analisis, didapatkan pada skor metode SOFI yaitu 11,00 yang artinya para pekerja mengalami kelelahan menengah dengan dimensi yang paling dirasakan lack of energy. Sedangkan pada metode OWAS didapatkan level risiko cedera dalam kategori 3 yaitu Distincly Harmful, yang berarti sikap tubuh pekerja berbahaya, maka sikap ini membutuhkan tindakan korektif segera. Untuk memperbaiki masalah pada sistem kerja tersebut, direkomendasikan untuk menggunakan alat bantu. Pada penelitian ini di usulkan alat material handling yaitu hand lift pallet truck, yang juga dirancang dengan mempertimbangkan antropometri pekerja. Sehingga usulan perbaikan ini, diharapkan mampu meminimalisir keletihan dan risiko terjadinya musculoskeletal disorders yang dapat dialami oleh para pekerja
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.