The goal of this study was to evaluate the bonding resistance of two dental ceramics. The samples, one of each type of ceramics, were split into 4 groups (n=4) separated from those from control group, the others were conditioned with 5% hydrofluoric acid, according to the times of 20, 40 and 60 seconds. Cylindrical pins of resin cement were applied in each sample. After a shearing test, the obtained results showed that experimental groups has given higher bonding strength values than the control groups for both ceramics. For the e.max ceramic, the highest values were observed with timings of 20 and 40 seconds and for the Suprinity ceramic the conditioning timings were insignificant. The authors concluded that the surface treatment with hydrofluoric acid improved the bonding strength for both ceramics; and the e.max ceramic showed higher bonding values than the Suprinity.
RESUMO O presente estudo visou caracterizar a interface entre resina e substrato dentário submetida aos processos restauradores convencional e autocondicionante, levando a observar a presença de gaps e infiltração dos sistemas adesivos nos substratos dentários. A análise foi realizada em dois substratos dentários: o esmalte e a dentina. Seis dentes hígidos, previamente coletados e armazenados, foram seccionados em três planos de corte distintos para avaliar a adesão em relação à morfologia dentária. Para isto, foi utilizado um sistema adesivo universal aplicado de maneira convencional e autocondicionante. A técnica autocondicionante não é eficiente em esmalte, apresentando formação de gaps. Já a convencional é mais eficiente devido ao processo de desmineralização por um ácido forte, ocasionando a penetração do adesivo. Para a dentina, a técnica convencional formou uma camada híbrida espessa, irregular e com penetração de tags resinosos e a autocondicionante formou uma camada híbrida mais fina, homogênea e sem tags. O tamanho da camada híbrida e penetração dos tags não influenciam na resistência adesiva, sendo este fator dependente da qualidade da camada híbrida e sua interação com o substrato.
RESUMO Este estudo analisou, por meio de ensaios de resistência de união ao cisalhamento e microcisalhamento, os tipos de fraturas e verificou a distribuição de tensões na interface por método de elementos finitos. Os modelos foram compostos por dentina, adesivo e resina composta. Como simplificação da metodologia, os materiais foram considerados elástico-lineares e isotrópicos. Dois modelos bi e tridimensionais foram criados para ambos os ensaios; e as forças aplicadas nos testes foram 50 N para cisalhamento e 15 N para microcisalhamento. O critério de falha abordado foi o de Mohr-Coulomb que descreve a resposta de materiais frágeis, portanto as análises se deram em relação à σ1, σ3 e τmáx.. As tensões máximas de cisalhamento foram comparadas com as tensões nominais dos modelos e observou-se que o modelo de cisalhamento apresenta uma maior variação se comparado ao microcisalhamento, outro ponto importante levantado é que a distribuição de tensões no modelo bidimensional é semelhante ao modelo tridimensional, sendo assim, o modelo pode ser simplificado a uma análise bidimensional nesse aspecto. Embora sejam aplicados esforços cisalhantes, o material falha por tração, fator observado quando analisamos o ensaio de cisalhamento. Ao se analisar graficamente o critério de falha Mohr-Coulomb modificado pôde-se observar possível falha coesiva da dentina para ensaios de cisalhamento e falha adesiva para os ensaios de microcisalhamento, e também os valores de τnomestiveram mais próximos da faixa de τmáx para os ensaios de microcisalhamento. Sendo assim, o estudo permite concluir que a metodologia desenvolvida de resistência adesiva para o ensaio de microcisalhamento é validada pela simulação computacional.
The aim of this study was to determine the hardness and the elasticity modulus of the two composite resins base of BISGMA with different inorganic particles: a nanoparticulated with a ceramic withload, (Filtek Z350XT-3M) with and without thermal activation and a microhybrid with no ceramic load (Opallis-FGM). The samples were prepared and subjected to the tests of Vickers hardness (Shimadzu HMV) and acoustic excitation pulse (Sonelastic ®). The samples were divided into three groups: G1-Filtek Z350 XT; G2-Filtek Z350XT MO (subject to further polymerization microwave) and G3-Opallis. The results showed that the hardness of G2 was significantly higher than the groups G1 and G3. The elastic modulus was higher than the G2 to G1 and G3. One can conclude that the resins filled with inorganic ceramic filler showed higher hardness and elastic modulus. The thermal activation increased the hardness and the elasticity modulus of the resin with ceramic load.
The goal of this study was to characterize the mechanical behavior of dentin, dental enamel and a nanoparticulate composite resin, used in dental restorations. This characterization was performed through the static and dynamic Vickers hardness test. As for the biological tissue assays, third included human molars were used. The nanoparticulate resinous composite was condensed into a matrix, measuring approximately 10x10x2mm. The obtained HV values were represented by hardness maps. The distribution of hardness values along the enamel and dentin structures occurred unevenly in the two hardness analyzes. For dental enamel, there were differences in hardness values when compared dynamic to static tests. This difference did not occur in dentin. It was observed that the mechanical behavior of the resinous composite resembled more the behavior of the dentin than the enamel.
The aim of this study was to evaluate the influence of shear and micro-shear tests on adhesive resistance and on defects in restorations in human dentin. The teeth were sectioned and embedded. The dentin surface was treated with universal system adhesive and the samples were divided into two groups. In the first, composite resin pins were fixed with 1 mm diameter and in the second, pins with 2 mm. After mechanical tests the samples were taken to the SEM for analysis of fractures. Tensile strength on G1 was 16 MPa and on G2 20 MPa. The fractures occurred after shear were mostly mixed and cohesive in dentin. On micro-shear adhesive and mixed, no cohesive. It can deduce that, the diameter of the pin influenced the adhesive resistance and the type of failure. Therefore, for evaluation of adhesive strength in dentin the test indicated is micro-shear.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.