The performance of a 15 kWp roof mounted, low angle tilted photovoltaic installation over the year 2019 has been analyzed in terms of the role of solar irradiation, ambient and module temperature, clouds cover and wind speed. The studied photovoltaic system operates under warm summer humid continental climate with the considerable influence of temperate oceanic zone. The role of significant changes of weather conditions in warm and cold part of the year has been shown. The negative impact of external temperature increase on the modules efficiency has been observed. The experimentally determined temperature coefficient of efficiency of the modules is equal to -0.06%/°C. Relatively high sum of insolation registered in the location in 2019 together with a lack of shade assure annual energy yield of 1098 kWh/kWp, energy density 188 kWh/m 2 , capacity factor 12.53% and performance ratio 82%.
Zmieniające się warunki otoczenia mają znaczący wpływ na sprawność i trwałość ogniw fotowoltaicznych. Na moduły fotowoltaiczne oddziałują między innymi takie czynniki zewnętrzne jak: temperatura modułu, zmieniająca się podczas dłuższej ekspozycji na promieniowanie świetlne, wiatr, zanieczyszczenia oraz częstotliwość opadów. Parametry modułów PV podawane przez producentów znacznie odbiegają od wyników osiąganych w warunkach naturalnych. W tej pracy przedstawiono laboratoryjne badanie wpływu temperatury modułu krzemowego polikrystalicznego na zmianę generowanego napięcia badanego bez obciążenia. Badania potwierdzają korelację wzrostu temperatury podczas długiej ekspozycji na promieniowanie świetlne ze spadkiem napięcia. Jednocześnie symulacja wiatru powoduje chłodzenie modułu oraz wzrost napięcia obwodu. Dalszy rozwój badań nad wpływem warunków otoczenia pozwoli na dokładną optymalizację umiejscowienia farm fotowoltaicznych.
Rynek odnawialnych źródeł energii z każdym dniem coraz bardziej się rozwija. Zapotrzebowanie na energię elektryczną wzrasta, przy czym zasoby konwencjonalnych i zarazem nieodnawialnych źródeł energii (paliw kopalnych) ulegają zubożeniu. Alternatywą dla nich są odnawialne źródła energii (OZE), których rezerwy uzupełniane są w naturalnych procesach ekosystemu, co stanowi o ich niewyczerpalności. Zmiany legislacyjne w Polsce dotyczące OZE spowodowały duże zainteresowanie małymi instalacjami fotowoltaicznymi w wyniku czego dotychczasowy konsument zmienia się w prosumenta energii elektrycznej. Rozwój rynku odnawialnych źródeł energii stawia przed projektantami ciągłe wyzwania, ponieważ projektowanie instalacji fotowoltaicznych o wysokiej wydajności dla istnieją-cych budynków, przy uwzględnieniu występujących lokalnych warunków oraz architektury budowli, jest niezwykle trudne. Uzysk energetyczny systemu słonecz-nego zależy od wielu czynników, jednym z najważniejszych jest wartość nasło-necznienia zależna od lokalizacji (szerokości geograficznej), a także orientacja projektowanego systemu względem kierunku azymutu. Narzędziem wspomagają-cym i usprawniającym projektowanie instalacji PV (Photovoltaics) jest oprogramowanie DDS-CAD, pozwalające przeprowadzić symulację uzysków energii elektrycznej. Wyniki otrzymanych symulacji umożliwiają w krótkim czasie porówna-nie wielu wirtualnych modeli instalacji pod kątem wydajności, a co za tym idzie wybranie najkorzystniejszego wariantu dla istniejącej orientacji geograficznej. W niniejszej pracy poddane zostały analizie rezultaty symulacji wirtualnych modeli instalacji fotowoltaicznych pod względem liczby generatorów fotowoltaicznych oraz wielkości uzysku energii elektrycznej przy założeniu wykorzystania całej powierzchni dachu oraz uwzględnieniu zmiany kąta usytuowania modułów PV względem okapu połaci dachowej i kierunku azymutu. WprowadzenieW ostatnich latach nastąpił intensywny rozwój fotowoltaiki na świecie, spowodowany wyczerpywaniem zasobów paliw kopalnych, wzrostem ich cen oraz uniezależnieniem się od krajów posiadających złoża kopalniane. Nie bez znaczenia są też klimatyczne konsekwencje spalania czyli emisja gazów cieplarnianych z paliw kopalnych. W wyniku wielu zmian legislacyjnych, jak również zgodnie z europejską strategią Unii Energetycznej oraz z Dyrektywą Parlamentu Europejskiego i Rady 2012/27/UE z dnia 25 października 2012 r. w sprawie efektywności energetycznej Polska do 2020 r. powinna uzyskać 15% udziału OZE w produkcji energii. Przyjęte na szczycie Unii Europejskiej w październiku 2014 r. nowe ramy klimatyczno-energetyczne zakładają kolejne, wieloletnie działania zapobiegające zmianom klimatu poprzez redukcję emisji dwutlenku węgla, a także zwiększenie udziału energii pochodzącej ze źródeł odnawialnych. Kraje członkowskie UE muszą dążyć do poprawy efektywności energetycznej o 27% do roku 2030. Zgodnie z danymi pochodzącymi z Urzędu Regulacji Energetyki zainstalowana moc w polskich elektrowniach wytwarzających energię elektryczną z promieniowania słonecznego w...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.