Acceptance of new students is one of the processes that exist in educational institutions every year, the number of prospective students who register causes the new student admission committee cannot manage everything properly so that it is less effective in handling it. In this study, the new student admission system used by Al-Basyariah Vocational School Bojong Gede still uses the system manually, which still uses paper records, so that minimal damage and even data loss occurs. Making a new student registration information system is expected to facilitate new prospective students in registering by saving time and costs compared to coming directly to school and with the information system of new student admissions, it is expected to help and simplify the processing of students in this school.
Perkembangan pendidikan tingkat menengah di Indonesia saat ini sedang difokuskan untuk meningkatkan kuantitas maupun kualitas lulusan Sekolah Menengah Kejuruan (SMK) yang mampu memenuhi kebutuhan industri. Salah satu teknologi yang saat ini banyak digunakan di industri darat maupun di bidang maritim adalah teknologi otomatis berbasis Programmable Logic Controller (PLC). PLC merupakan salah satu mode kontrol otomatis yang memerlukan logika desain untuk menjalankan aturan dan langkah-langkah kontrolnya, sehingga diperlukan pengetahuan dan kemampuan untuk mendesain PLC. Namun demikian, dengan situasi pandemi Covid-19 menjadikan pembelajaran PLC menjadi lebih sulit dilakukan. Untuk mempelajari cara memprogram PLC, siswa maupun guru harus memasangkan piranti lunak yang membutuhkan kapasitas besar dan membebani komputer. Solusi dari permasalahan tersebut adalah dengan mempelajari pemrograman PLC melalui media daring, yaitu melalui PLC Fiddle. Media PLC Fiddle sendiri tergolong baru dan belum banyak diketahui oleh pengajar di Indonesia. Dengan dilakukan pelatihan dasar PLC melalui media daring kepada guru-guru SMK di Surabaya, diharapkan guru-guru SMK dapat tetap mengajarkan kemampuan untuk mendesain PLC kepada siswa sesuai kebutuhan industri walaupun dunia masih dilanda pandemic Covid-19. Selanjutnya, diharapkan bahwa para guru tersebut dapat mengaplikasikan ilmu dalam mendesain PLC dalam proses belajar mengajar, sehingga lulusan para lulusan SMK dapat memiliki kemampuan untuk mendesain PLC dengan baik.
Penelitian ini bertujuan untuk mengungkap korelasi antara aktivitas latihan gamolan dan relasi sosial para pemainnya. Penelitian ini menggunakan pendekatan kuantitatif dengan jenis ex-post facto. Populasi penelitian ini 40 orang anggota salah satu kelompok kesenian Lampung. Penentuan jumlah sampel mengunakan teknik sampling jenuh, yaitu sampel diambil dari keseluruhan populasi dengan pertimbangan jumlah populasi yang tidak banyak. Analisis data menggunakan analisis deskriptif. Hasil pengolahan data menunjukan nilai signifikansi sebesar 0,001. Dengan kriteria pengambilan keputusan bahwa jika nilai signifikansi sebesar < 0,05 maka, aktivitas latihan gamolan dan relasi sosial dinyatakan berkorelasi secara signifikan. Dengan demikian aktivitas latihan gamolan berkorelasi positif terhadap relasi sosial pemian gamolan.
Abstrak-Kebutuhan akan listrik di kapal saat ini sangat tinggi, karena hampir semua aktivitas di kapal seperti berlayar, bermanuver, bongkar muat dan lego jangkar membutuhkan konsumsi listrik yang besar. Pada berbagai macam kondisi tersebut perlu diketahui seberapa besar nilai losses tegangan atau tegangan jatuh dan cara untuk melakukan perbaikan tegangan jatuh. Pada penulisan tugas akhir akan dikaji secara teknis cara melakukan perhitungan tegangan jatuh secara manual dan membandingkannya dengan simulasi software. Pada simulasi software digunakan load flow analysis dan motor acceleration analysis sebagai metode untuk melakukan perhitungan tegangan jatuh secara simulasi. Hasil yang diperoleh terdapat tegangan jatuh terbesar pada kondisi maneuver, saat starting bow thruster terdapat tegangan jatuh selama 60 detik yang tidak sesuai dengan standar IEC 5% dan tidak direkomendasikan oleh IEEE. Setelah dilakukan perbaikan pada bow thruster dengan cara menaikkan tap transformator sebesar 2,5% dengan tegangan sekunder 400V pada hasil running load flow analysis dan memberi kapasitor sebesar 2000 kVAr, tegangan jatuh pada hasil running motor acceleration analysis tegangan jatuh dapat diturunkan menjadi 13 detik yang sesuai dengan standar IEC dan rekomendasi IEEE. Kata Kunci-load flow analysis, motor acceleration analysis, sistem kelistrikan kapal, tegangan jatuh
Abstrak-Turbin angin merupakan salah satu solusi untuk mengatasi sumber energi fosil yang jumlahnya semakin terbatas. Salah satu generator yang digunakan untuk turbin angin adalah Doubly Fed Induction Generator (DFIG). Arus AC yang disuplai berasal dari belitan stator yang terhubung langsung dengan jaringan dan belitan rotor yang juga terhubung dengan jaringan melalui power electronic converter dengan jenis back-to-back converter. Pada penelitian ini dilakukan simulasi pembangkit listrik tenaga angin menggunakan DFIG yang dihubungkan ke jaringan melalui back-to-back converter. Konverter ini dioperasikan dengan tujuan mengontrol kecepatan rotor DFIG agar menghasilkan daya maksimum dan menjaga nilai tegangan kapasitor DC tetap konstan. Sistem dilengkapi dengan metode Maximum Power Point Tracking (MPPT) untuk menghasilkan daya maksimum pada kecepatan angin yang berbeda-beda. Hasil simulasi untuk pengujian akurasi rangkaian kontrol menunjukkan nilai akurasi yang tinggi dibuktikan dengan nilai error dibawah 1% untuk semua kondisi kecepatan angin. Kata Kunci : Doubly Fed Induction Generator (DFIG), Back-to-back Converter, dan energi terbarukan.Abstract-Wind turbine is one of the solutions to overcome the decreasing amount of fossil fuel. One type of generator which can be used on wind turbine application is Doubly Fed Induction Generator (DFIG). The AC current is supplied from both stator winding which connected directly to the grid and rotor winding which connected to the grid through back-to-back power electronic converter. This paper provides simulation of wind turbine using DFIG connected to the grid through back-to-back converter. The back-toback converter is operated in order to control the rotor speed of DFIG, so that the DFIG can generate maximum power and maintain constant voltage on DC link capacitor. The system is equipped with Maximum Power Point Tracking (MPPT) method to generate maximum power on various wind speed condition. The simulation results show that the control system has high accuracy, proven with error value under 1% on various wind speed condition.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.