The aim of the study was to evaluate the effects of different polishing systems on the surface roughness of various bulk‐fill and nano‐filled resin‐based composites using different methods. For the study, a total of 192 disc‐shaped samples (10‐mm wide and 2‐mm thick) were prepared from four different bulk‐fill composites (Filtek Bulk Fill, X‐tra fil, Beautifil‐Bulk Restorative and Fill Up) and two nano‐filled resin‐based composites (Ceram.x SphereTEC and Filtek Z550). The samples in each composite group were divided into four subgroups according to the polishing system to be used (n = 8). Four different polishing systems (Sof‐Lex Diamond, Clearfil Twist Dia, HiLuster Plus, OptiDisc) were applied. Then, surface roughness measurements were carried out using a contact‐type profilometer. One sample from each group was subjected to atomic force microscopy (AFM) and scanning electron microscope (SEM) examinations. Surface roughness (Ra) values were statistically analyzed in terms of composites and polishing systems using the two‐way analysis of variance (ANOVA) and comparisons among groups were performed using the Tukey test (α = .05). Surface roughness values differed significantly in relation to the composite and polishing system used (p < .05). Among all composites, the lowest surface roughness values were obtained in the groups treated with the OptiDisc polishing system (except Beautifil‐Bulk Restorative), whereas the highest roughness values were observed in the group polished with Clearfil Twist Dia (except Filtek Z550). X‐tra fil showed the highest roughness value with all polishing systems tested. The findings of AFM analyses were consistent with profilometric measurements. The nano‐filled resin‐based composites showed smoother surface than bulk‐fill composites and the type of the polishing systems was found to affect surface roughness.
ÖZETAmaç: Bu çalışmanın amacı, farklı içeriklere sahip yedi estetik restoratif materyalin polimerizasyon sonrası meydana gelen renk değişiminin değerlendirilmesidir. Yöntem: Çalışmada nanofil, nano-hibrit ve mikro-hibrit kompozit rezin, siloran kompozit rezin, kompomer, ormoser ve giomer restoratif materyalleri test edildi. Materyal örnekleri 10-mm genişliğinde ve 2-mm derinliğinde teflon kalıplarda hazırlandı. Renk ölçümleri non-kontakt tip spektrofotometre ile sertleştirme öncesinde ve sonrasında yapıldı ve CIE L*a*b renk sistemi kullanılarak renk değerlerindeki değişimler hesaplandı. Elde edilen veriler tek yönlü ANOVA ve Tukey çoklu karşılaştırma testi ile istatistiksel olarak analiz edildi. Bulgular: Tek yönlü ANOVA sonucuna göre; restorasyon materyallerinde görülen polimerizasyon sonrası renk değişimleri istatistiksel olarak anlamlı bulundu (p ≤ 0.05).. Test edilen materyallerin renk değişim değerlerinin (∆E) 3.37 ile 13,76 aralığında olduğu tespit edildi. Polimerizasyon ile en yüksek renk değişimi siloran kompozit grubunda gözlenirken, en düşük renk değişimi nano-hibrit kompozit grubunda gözlendi. Polimerizasyon sonrasında tüm gruplarda ∆L*, ve ∆b* değerlerinde azalma izlenirken, ∆a* değerlerinde ise artış izlendi (p ≤ 0.05). Sonuç: Restorasyon materyallerinde polimerizasyon sonrası ortaya çıkan klinik olarak kabul edilemez renk değişikliği yapılan restorasyonun renk uyumsuzluğuna neden olabilir. Bu nedenle, özellikle estetik bölgede yapılacak olan bir restorasyon öncesinde, klinisyenin kullandığı restoratif materyalin renk özelliklerini iyi bilmesi ve renk seçimini polimerizasyon sonrası oluşan sonuç rengi baz alarak yapması önerilmektedir. Anahtar Kelimeler: estetik restoratif materyalller, polimerizasyon, renk seçimi, renk değişimi
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.