Wicking, the absorption of liquid into narrow spaces without the assistance of external forces, has drawn much attention due to its potential applications in many engineering fields. Increasing surface roughness using micro/nanostructures can improve capillary action to enhance wicking. However, reducing the structure length scale can also result in significant viscous forces to impede wicking. In this work, we demonstrate enhanced wicking dynamics by using nanostructures with three-dimensional (3D) hierarchical features to increase the surface area while mitigating the obstruction of liquid flow. The proposed structures were engineered using a combination of interference lithography and hydrothermal synthesis of ZnO nanowires, where structures at two length scales were independently designed to control wicking behavior. The fabricated hierarchical 3D structures were tested for water and ethanol wicking properties, demonstrating improved wicking dynamics with intermediate nanowire lengths. The experimental data agree with the derived fluid model based on the balance of capillary and vicious forces. The hierarchical wicking structures can be potentially used in applications in water harvesting surfaces, microfluidics, and integrated heat exchangers.

No abstract

The refractive indices of naturally occurring materials are limited, and there exists an index gap between indices of air and available solid materials. With many photonics and electronics applications, there has been considerable effort in creating artificial materials with optical and dielectric properties similar to air while simultaneously being mechanically stable to bear load. Here, a class of ordered nanolattice materials consisting of periodic thin‐shell structures with near‐unity refractive index and high stiffness is demonstrated. Using a combination of 3D nanolithography and atomic layer deposition, these ordered nanostructured materials have reduced optical scattering and improved mechanical stability compared to existing randomly porous materials. Using ZnO and Al2O3 as the building materials, refractive indices from 1.3 down to 1.025 are achieved. The experimental data can be accurately described by Maxwell Garnett effective media theory, which can provide a guide for index design. The demonstrated low‐index, low‐scattering, and high‐stiffness materials can serve as high‐quality optical films in multilayer photonic structures, waveguides, resonators, and ultra‐low‐k dielectrics.

Thin-film interference is a well-known effect, and it is commonly observed in the colored appearance of many natural phenomena. Caused by the interference of light reflected from the interfaces of thin material layers, such interference effects can lead to wavelength and angle-selective behavior in thin-film devices. In this work, we describe the use of interfacial nanostructures to eliminate interference effects in thin films. Using the same principle inspired by moth-eye structures, this approach creates an effective medium where the index is gradually varying between the neighboring materials. We present the fabrication process for such nanostructures at a polymer-silicon interface, and experimentally demonstrate its effectiveness in suppressing thin-film interference. The principle demonstrated in this work can lead to enhanced efficiency and reduce wavelength/angle sensitivity in multilayer optoelectronic devices.

Multifunctional nano-accordion structures exhibiting a unique combination of conductivity, stretchability, and transparency are fabricated through a combination of nanolithography and atomic layer deposition.The nanostructured material demonstrated two orders-of-magnitude improvement in stretchability, repeatable electrical performance for cyclic stretching and bending, and broadband optical transmission up to 70%. The proposed experimental techniques and analytical models enable the deterministic design of nano-accordion geometry to control material stretchability. The proposed nanostructures are promising for applications in transparent flexible electronics, stretchable displays, and wearable sensors.