In this study, biocompatible titanium-niobium (Ti-Nb) alloys were fabricated by using powder metallurgy methods. Physical, morphological, thermal, and mechanical analyses were performed and their in vivo compatibility was evaluated. Besides α, β, and α″ martensitic phases, α+β Widmanstätten phase due to increasing sintering temperature was seen in the microstructure of the alloys. Phase transformation temperatures of the samples decreased as Nb content increased. The ratio of Nb in the samples affected their mechanical properties. No toxic effect was observed on implanted sites. This study shows that Ti-Nb alloys can be potentially used for orthopedic applications without any toxic effects.
Titanyum esaslı alaşımların biyomalzeme olarak kullanımını yaygınlaştırmak için son yıllarda gözenekli implant malzemesi olarak üretimi ve uygulanması üzerine yoğun çalışmalar yapılmaktadır. Ti-esaslı alaşımlar yüksek korozyon direnci, düşük elastik modülü ve üstün biyouyumluluğu nedeniyle medikal uygulamalarda yaygın olarak kullanılmaktadır. Bu tür alaşımlar özellikle sert doku implantları olarak tercih edilmektedirler. Alaşım gözenekli malzeme olarak üretildiği zaman vücut içerisinde canlı dokunun ilerlemesine, kan ve besin taşınmasına imkan sağlayacağı ve kemik ile iyi bir bağ oluşturacağı gerçektir. Bu nedenle bu çalışmada, yüksek saflıkta element tozları kullanılarak saf titanyum ve titanyum esaslı Ti-10Nb alaşımı üretildi. Üretim sonrası, saf titanyum yapısının tamamen α fazından ibaret olduğu, Ti-10Nb alaşımının yapısında ise α fazına ilaveten β ve α" fazlarının varlığı tespit edildi. Ti-10Nb alaşımının gözenek oranının saf titanyum numunesine göre daha fazla ve elastik modülünün ise kemik yapısına yakın olduğu belirlendi. Üretilen Ti-10Nb numunesi mikroyapı ve basma dayanımı açısından ideal bir implant malzemesi olarak daha uygun olacağı anlaşıldı.
ÖZET: Enerji üretimi ve depolama teknolojilerinin kullanımı son yıllarda büyük bir önem kazanmıştır. Sodyum iyon piller (Na-iyon) alanındaki gelişmelere bakıldığında düşük maliyetlerinden dolayı lityum iyon (Li-iyon) pillere alternatif olarak yakın gelecekte ümit vadetmektedir. Na-iyon pilleri bu kadar cazip hale getiren başlıca nedenler lityum ile benzer kimyasal özelliklere sahip olması ve üretim maliyetlerinin daha düşük olmasıdır. Bu çalışmada NaFePO4 katot malzemesinin üretiminde iki kademeli ısıl işlem ile katı hal reaksiyon yöntemi uygulanmıştır. Üretilen malzemelerin fiziksel karekterizasyonları için XRD, SEM, FTIR kullanılmış, manyetik özellikleri ise χ-T analizleri ile incelenmiştir. Pillerin performansını ve elektrokimyasal özelliklerini araştırmak için üretilen katot malzemeleri CR2032 düğme pil haline getirilerek döngüsel voltametri (CV) ve kapasite ölçümleri yapılmıştır. NaFePO4 katot malzemesinin XRD analizlerinde safsızlık fazları gözlenmemiştir. Pil haline getirilmiş katot materyallerinin 1,5-4,0 V aralığında 100 döngülük kapasite değeri ölçülmüş, ilk deşarj kapasitesinin 26,29 mAh g -1 olduğu ve 100. döngü sonunda kapasite değerinin ilk döngüye oranla %10.99 arttığı gözlemlenmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.