Undercutting is a common problem in wet anisotropic etching. This problem in turn, influences the performance and sensitivity of MEMS devices. This paper investigates the use of corner compensation to prevent convex corner undercutting in a MEMS piezoresistive accelerometer. The Intellisuite CAD simulation software was used for designing the mask with corner compensation and for analysing wet anisotropic etching profiles in potassium hydroxide (KOH) and tetra-methyl-ammonium-hydroxide (TMAH) solutions at different concentrations and temperatures. Perfect 90 degrees corners on the proof mass was successfully etched using a corner compensation design at etching temperature of 63 °C for KOH and 67.7 °C for TMAH with 25 wt% and 10.3 wt% concentration levels, respectively. Etching in TMAH required lower concentration level, thus making the etching process safer. However, TMAH required longer time to etch perfect convex corners compared to KOH. Nevertheless, both KOH and TMAH etchants have been successfully used to etch perfect convex corners by using the designed corner compensation mask.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.