The capacity of a Multiple-Input Multiple-Output (MIMO) channel in which the antenna outputs are processed by an analog linear combining network and quantized by a set of threshold quantizers is studied. The linear combining weights and quantization thresholds are selected from a set of possible configurations as a function of the channel matrix. The possible configurations of the combining network model specific analog receiver architectures, such as single antenna selection, sign quantization of the antenna outputs or linear processing of the outputs. An interesting connection between the capacity of this channel and a constrained sphere packing problem in which unit spheres are packed in a hyperplane arrangement is shown. From a high-level perspective, this follows from the fact that each threshold quantizer can be viewed as a hyperplane partitioning the transmitter signal space. Accordingly, the output of the set of quantizers corresponds to the possible regions induced by the hyperplane arrangement corresponding to the channel realization and receiver configuration. This connection provides a number of important insights into the design of quantization architectures for MIMO receivers; for instance, it shows that for a given number of quantizers, choosing configurations which induce a larger number of partitions can lead to higher rates. 1

Directional transmission patterns (a.k.a. narrow beams) are the key to wireless communications in millimeter wave (mmWave) frequency bands which suffer from high path loss and severe shadowing. In addition, the propagation channel in mmWave frequencies incorporates only a few number of spatial clusters requiring a procedure to align the corresponding narrow beams with the angle of departure (AoD) of the channel clusters. The objective of this procedure, called beam alignment (BA) is to increase the beamforming gain for subsequent data communication. Several prior studies consider optimizing BA procedure to achieve various objectives such as reducing the BA overhead, increasing throughput, and reducing power consumption. While these studies mostly provide optimized BA schemes for scenarios with a single active user, there are often multiple active users in practical networks. Consequently, it is more efficient in terms of BA overhead and delay to design multi-user BA schemes which can perform beam management for multiple users collectively. This paper considers a class of multi-user BA schemes where the base station performs a one shot scan of the angular domain to simultaneously localize multiple users. The objective is to minimize the average of expected width of remaining uncertainty regions (UR) on the AoDs after receiving users' feedbacks. Fundamental bounds on the optimal performance are analyzed using information theoretic tools. Furthermore, a beam design optimization problem is formulated and a practical BA scheme, which provides significant gains compared to the beam sweeping used in 5G standard is proposed.

No abstract

No abstract

The fundamental limits of communication over multiple-input multiple-output (MIMO) networks are considered when a limited number of one-bit analog to digital converters (ADC) are used at the receiver terminals. Prior works have mainly focused on point-to-point communications, where receiver architectures consisting of a concatenation of an analog processing module, a limited number of one-bit ADCs with non-adaptive thresholds, and a digital processing module are considered. In this work, a new receiver architecture is proposed which utilizes adaptive threshold one-bit ADCs -where the ADC thresholds at each channel-use are dependent on the channel outputs in the previous channel-usesto mitigate the quantization rate-loss. Coding schemes are proposed for communication over the pointto-point and broadcast channels, and achievable rate regions are derived. In the high SNR regime, it is shown that using the proposed architectures and coding schemes leads to the largest achievable rate regions among all receiver architectures with the same number of one-bit ADCs.