No abstract

Abstract-Lower extremity amputees suffer from mobility limitations which will result in a degradation of their quality of life. Wearable sensors are frequently used to assess spatiotemporal, kinematic and kinetic parameters providing the means to establish an interactive control of the amputee-prosthesisenvironment system. Gait events and the gait phase detection of an amputee's locomotion are vital for controlling lower limb prosthetic devices. The paper presents an approach to real-time gait event detection for lower limb amputees using a wireless gyroscope attached to the shank when performing level ground and ramp activities. The results were validated using both healthy and amputee subjects and showed that the time differences in identifying Initial Contact (IC) and Toe Off (TO) events were larger in a transfemoral amputee when compared to the control subjects and a transtibial amputee (TTA). Overall, the time difference latency lies within a range of ± 50 ms while the detection rate was 100% for all activities. Based on the validated results, the IC and TO events can be accurately detected using the proposed system in both control subjects and amputees when performing activities of daily living and can also be utilized in the clinical setup for rehabilitation and assessing the performance of lower limb prosthesis users.

In this paper, a novel approach for recognition of walking activities and gait events with wearable sensors is presented. This approach, called adaptive Bayesian inference system (BasIS), uses a probabilistic formulation with a sequential analysis method, for recognition of walking activities performed by participants. Recognition of gait events, needed to identify the state of the human body during the walking activity, is also provided by the proposed method. In addition, the BasIS system includes an adaptive action-perception method for the prediction of gait events. The adaptive approach uses the knowledge gained from decisions made over time by the inference system. The action-perception method allows the BasIS system to autonomously adapt its performance, based on the evaluation of its own predictions and decisions made over time. The proposed approach is implemented in a layered architecture and validated with the recognition of three walking activities:level-ground, ramp ascent and ramp descent. The validation process employs real data from three inertial measurements units attached to the thigh, shanks and foot of participants while performing walking activities. The experiments show that mean decision times of 240 ms and 40 ms are needed to achieve mean accuracies of 99.87% and 99.82% for recognition of walking activities and gait events, respectively. The validation experiments also show that the performance, in accuracy and speed, is not significantly affected when noise is added to sensor measurements. These results show that the proposed adaptive recognition system is accurate, fast and robust to sensor noise, but also capable to adapt its own performance over time. Overall, the adaptive BasIS system demonstrates to be a robust and suitable computational approach for the intelligent recognition of activities of daily living using wearable sensors.

No abstract

/0000-0002-9922-7912, Mahmood, I and Dehghani-Sanij, AA (2018) Simultaneous Bayesian recognition of locomotion and gait phases with wearable sensors.

Identification of human movements is crucial for the design of intelligent devices capable to provide assistance. In this work, a Bayesian formulation, together with a sequential analysis method, is presented for identification of sit-to-stand (SiSt) and stand-to-sit (StSi) activities. This method performs autonomous iterative accumulation of sensor measurements and decision-making processes, while dealing with noise and uncertainty present in sensors. First, the Bayesian formulation is able to identify sit, transition and stand activity states. Second, the transition state, divided into transition phases, is used to identify the state of the human body during SiSt and StSi. These processes employ acceleration signals from an inertial measurement unit attached to the thigh of participants. Validation of our method with experiments in offline, real-time and a simulated environment, shows its capability to identify the human body during SiSt and StSi with an accuracy of 100% and mean response time of 50 ms (5 sensor measurements). In the simulated environment, our approach shows its potential to interact with low-level methods required for robot control. Overall, this work offers a robust framework for intelligent and autonomous systems, capable to recognise the human intent to rise from and sit on a chair, which is essential to provide accurate and fast assistance.

No abstract

ReuseUnless indicated otherwise, fulltext items are protected by copyright with all rights reserved. The copyright exception in section 29 of the Copyright, Designs and Patents Act 1988 allows the making of a single copy solely for the purpose of non-commercial research or private study within the limits of fair dealing. The publisher or other rights-holder may allow further reproduction and re-use of this version -refer to the White Rose Research Online record for this item. Where records identify the publisher as the copyright holder, users can verify any specific terms of use on the publisher's website. TakedownIf you consider content in White Rose Research Online to be in breach of UK law, please notify us by emailing eprints@whiterose.ac.uk including the URL of the record and the reason for the withdrawal request. Overall, detection accuracy was 99.78% for all the events in both groups. Based on the validated results, the proposed system can be used to accurately detect the temporal gait events in real-time that leads to the detection of gait phase system and therefore, can be utilized in gait analysis applications and the control of lower limb prostheses.