The utilization of microbial pectinase in different industries has been increased in its world demand. The major sources of pectinase are microorganisms mainly bacteria, fungi and yeast. The utilization of low-cost agro-industrial wastes as substrates has been preferable in pectinase production. Pectinase production faced various parameters optimization constraints such as temperature, pH and production times which are the main factors in pectinase production. The pectinase enzyme is getting attention due to its several advantages; hence, it needs to be explored further to take its maximum advantage in different industries. This review discusses the pectin substance structure, substrate for pectinase production, factors influencing pectinase production, the industrial application of microbial pectinase and also discusses challenges and future opportunities of applying microbial pectinase in industry.
Human and industrial activities produce and discharge wastes containing heavy metals into the water resources making them polluted, threatening human health and the ecosystem. Biosorption, the process of passive cation binding by dead or living biomass, represents a potentially cost-effective way of eliminating toxic heavy metals from industrial wastewater. The abilities of microorganisms to remove metal ions in solution have been extensively studied; in particular, live and dead fungi have been recognized as a promising class of low-cost adsorbents for the removal of heavy metal ions. The biosorption behavior of fungal biomass is getting attention due to its several advantages; hence, it needs to be explored further to take its maximum advantage on wastewater treatment. This review discusses the live and dead fungi characteristics of sorption, factors influencing heavy metal removal, and the biosorption capacities for heavy metal ions removal and also discusses the biosorption mechanisms.
Rapid industrialization leads to serious environmental hazards due to the increase in the release of pollutants into the environment. Industries that use synthetic dyes for different applications are a predominant source for dye contaminants by releasing the dye in wastewater with pretreatment or without treatment directly into the water bodies, making serious water pollution in the environment. Therefore, it is imperative to safeguard the environment from such contaminants and their associated negative impacts. The conventional treatment method that is used to treat dye-contaminated wastewater is generally costly and has a possibility to produce secondary metabolites. Due to the above problems, the biological method is preferable to treat effluent or dye-contaminated wastewater. Phycoremediation is an algae-based eco-friendly dye abatement technique from contaminated environments. This review highlights the phycoremediation of dyes and its underlying mechanisms along with the information on synthetic dyes, classification, hazardous effects, and other major techniques of dye abatement. This review provides a comprehensive insight into several influencing factors such as pH, temperature, contact time, the dose of algae biomass, and agitation speed, as well as functional groups involved in the phycoremediation process.
Heavy metals generated mainly through many anthropogenic processes, and some natural processes have been a great environmental challenge and continued to be the concern of many researchers and environmental scientists. This is mainly due to their highest toxicity even at a minimum concentration as they are nonbiodegradable and can persist in the aquatic and terrestrial environments for long periods. Chromium ions, especially hexavalent ions (Cr(VI)) generated through the different industrial process such as tanneries, metallurgical, petroleum, refractory, oil well drilling, electroplating, mining, textile, pulp and paper industries, are among toxic heavy metal ions, which pose toxic effects to human, plants, microorganisms, and aquatic lives. This review work is aimed at biosorption of hexavalent chromium (Cr(VI)) through microbial biomass, mainly bacteria, fungi, and microalgae, factors influencing the biosorption of chromium by microorganisms and the mechanism involved in the remediation process and the functional groups participated in the uptake of toxic Cr(VI) from contaminated environments by biosorbents. The biosorption process is relatively more advantageous over conventional remediation technique as it is rapid, economical, requires minimal preparatory steps, efficient, needs no toxic chemicals, and allows regeneration of biosorbent at the end of the process. Also, the presence of multiple functional groups in microbial cell surfaces and more active binding sites allow easy uptake and binding of a greater number of toxic heavy metal ions from polluted samples. This could be useful in creating new insights into the development and advancement of future technologies for future research on the bioremediation of toxic heavy metals at the industrial scale.
Phycoremediation of heavy metals has garnered considerable recent research interest. In this study, an indigenous microalga (Chlamydomonas sp.)‐based biosorbent was employed for biosorption of Cr(VI) dissolved solids (Cr(VI)‐DS), optimized using response surface methodology (RSM). The effects of microalga concentration, pH, and contact time were studied with 250 mg Cr(VI)‐DS L−1. The biosorption of Cr(VI)‐DS was higher at acidic pH (94.17% at pH 4) than at alkaline conditions (68.53% at pH 10). The interaction of pH and microalga concentration exerted significant (p < 0.05) influence on the biosorption. Under the optimized parameters of 1.5 g microalga L−1, pH 4, and contact time of 30 min, a predicted biosorption of 91.31% and biosorption capacity of 152 mg Cr(VI)‐DS g−1 biomass were documented. FTIR analysis attested the electronegative surface functional groups of the microalgae biomass, bracketed together with its high biosorption potency. The study evinced the potential of the indigenous microalga for remediation of hexavalent chromium. Practitioner points Indigenous Ethiopian microalga (Chlamydomonas sp.) exhibited 94% Cr(VI) abatement with biosorption capacity of 152 mg Cr(VI) g−1. FTIR analysis of the biosorbent divulged the presence of electronegative functional groups (amino, carboxyl, hydroxyl, and carbonyl groups). Higher biosorption of Cr(VI)‐DS under acidic pH (94.17% at pH 4) than alkaline pH (68.53% at pH 10). Significant (p < 0.05) interaction effect of pH and biomass concentration on the biosorption, evinced in RSM optimization 91% Cr(VI) removal achieved under optimal conditions of 1.5 g biosorbent L−1, 30 min of contact time, and pH 4.
Purpose The textile industry’s previous chemical use resulted in thousands of practical particulate emissions, such as machine component damage and drainage system blockage, both of which have practical implications. Enzyme-based textile processing is cost-effective, environmentally friendly, non-hazardous, and water-saving. The purpose of this review is to give evidence on the potential activity of microbial cellulase in the textile industry, which is mostly confined to the realm of research. Methods This review was progressive by considering peer-reviewed papers linked to microbial cellulase production, and its prospective application for textile industries was appraised and produced to develop this assessment. Articles were divided into two categories based on the results of trustworthy educational journals: methods used to produce the diversity of microorganisms through fermentation processes and such approaches used to produce the diversity of microbes through microbial fermentation. Submerged fermentation (SMF) and solid-state fermentation (SSF) techniques are currently being used to meet industrial demand for microbial cellulase production in the bio textile industry. Results Microbial cellulase is vital for increasing day to day due to its no side effect on the environment and human health becoming increasingly important. In conventional textile processing, the gray cloth was subjected to a series of chemical treatments that involved breaking the dye molecule’s amino group with Cl − , which started and accelerated dye(-resistant) bond cracking. A cellulase enzyme is primarily derived from a variety of microbial species found in various ecological settings as a biotextile/bio-based product technology for future needs in industrial applications. Conclusion Cellulase has been produced for its advantages in cellulose-based textiles, as well as for quality enhancement and fabric maintenance over traditional approaches. Cellulase’s role in the industry was microbial fermentation processes in textile processing which was chosen as an appropriate and environmentally sound solution for a long and healthy lifestyle.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.