SUMMARY Objective: To examine how exposure to accelerated artificial aging (AAA) stimuli (ultraviolet [UV] light) affects the color stability of a composite resin following surface sealant (SS) application. Methods and Materials: A total of 30 cylindrical composite resin (Esthet-X) discs were prepared using Teflon-coated rings. The treatment groups, defined by different SS (Seal-N-Sine, PermaSeal, OptiGuard, Biscover LV, and DuraFinish) use, were divided into five groups of six discs each. The discs were subjected to baseline color measurements followed by measurements after surface sealant application (specular included component [SCI] and specular excluded component [SCE]) using a spectrophotometer. Three measurements (SCI and SCE) were performed for a total of 18 readings (test surface) per specimen group. All specimens were then exposed to a UV light source for a total of 382 hours. Color readings of the specimens were again recorded for each group. Quantitative color measurements were executed using Commission Internationale de l'Eclairage L*a*b* calculations. Results: Baseline color measurements of the composite resin discs, following the AAA exposure protocol, revealed no significant differences. A comparison of the composite resin discs before and after SS application (without UV light exposure) showed statistically significant differences using both SCI and SCE measurement criteria. Although significant differences were encountered between the ΔL*, Δa*, Δb*, and ΔE parameters, all specimens (groups) were within the clinically acceptable range (1.0<ΔE≤ 3.3). Again, statistically significant differences were noted (ΔL*, Δa*, Δb*, and ΔE parameters) for all specimen groups receiving SS application, utilizing both SCI and SCE measurements, following exposure to UV light. All groups were within the clinically acceptable range (1.0<ΔE≤ 3.3), except the Durafinish group. The Durafinish SS group experienced significantly greater (p<0.001) overall color change (SCI and SCE) following UV light exposure. An intergroup comparison following UV exposure revealed that the Permaseal, OptiGuard, and Seal-n-Shine SS groups displayed the least amount of color change statistically but not necessarily always perceptibly significant, while the Durafinish group exhibited the greatest color change statistically and perceptibly. Conclusions: The color stability of a composite resin, including the addition of most SSs, was not affected perceptibly by UV light exposure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.