No abstract

In the present work six metals (Cu, Pb, Zn, Cd, Mn and Ni) were analyzed for, using atomic absorption spectrophotometry in three main feed brands commonly used in Sokoto (2 commercial feed and 1 locally compounded chicken feed). Initially, the samples were digested with concentrated nitric acid and perchloric acid at about 3700C to 4500C heat in a digestion block. The concentration in ìg/ml of the six metals analyzed for in the feed samples ranged between 0.04 and 1.21 for Cu, 0.01 and 0.55 for Pb, 1.43 and 11.65 for Zn, 0.10 and 0.12 Cd, 0.94 and 3.12 for Mn and 0.004 and 0.25 for Ni. In most of the analyzed samples, the concentration of Cu, Zn, Mn and Ni was found to be lower than the nutritional requirement of broiler chicken at a level which could be harmful for the poultry. Also the study showed the presence of heavy metals (Pb and Cd) in all the feed samples analyzed, but none exceeded permissible levels as set by European Union and National Research Council.Keywords: Atomic absorption spectrophotometry, Chicken feeds, Contamination, Heavy metals, Sokoto, Toxicity

This research monitored the level of some heavy metals in soil and a plant species around iron smelting industry. The soil in different depths D1 (0 -10 cm), D2 (10 – 20 cm) and D3 (20 -30 cm) and plant (Tithonia diversifolia) known as Mexican sunflower were sampled in four soil sampling points (SSP) and plant sampling points (PSP)  which are 50, 100, 150 and 200 m away from the industry. The concentrations of Cr, Cu, Fe, Pb and Zn in the soil and plant digest were determined using Atomic Absorption Spectroscopy (AAS). Some physicochemical properties like pH, electrical conductivity and organic matter were also measured. The result of the analysis of the heavy metals in the soil was in the sequence Fe > Zn > Cu >Pb> Cr at SSP1 SSP2 and SSP4 while Fe > Zn > Cu > Cr > Pb at SSP3. In the plant, the result showed the presence of these heavy metals except Pb which was not present in any sampling points. The concentration of iron (Fe) in the plant decreased away from PSP1 to PSP4 around the industry. The physicochemical properties like pH which influenced the availability of metals in soil were found to increase away from SSP1 to SSP4 and consequently its effect on the concentration of these heavy metals in plants, particularly for Fe and Zn. Although, heavy metals monitored were within the permissible limit of WHO except Fe in soil, the trend of their presence in

The aim of this research is to determine the level and distribution of Cu, Cd, Cr, Pb and Ni from soils samples within the vicinities of Old Panteka market of Kaduna state, Nigeria. The design of this study is to compare the soil heavy metal concentrat permitted by the Nigerian environmental guideline as well as international standards and also subject the data to descriptive analysis to determine the correlation between the heavy metals and some physicochemical parameter. depths from ten (10) sample locations and one control sample was collected on the same day at Old Panteka market of Kaduna, Nigeria. The total concentrations of Cu, Cr, Cd, P determined using Atomic Absorption spectrophotometer. Cation exchange capacity (CEC), pH, electrical conductivity (EC) and particle size distribution of the soil samples were also determined.