High-energy X-rays between 30 keV and 1 MeV, such as provided by modern synchrotron radiation sources as the ESRF and HASYLAB, bear the advantage of high penetration into most materials. Even heavy element compositions can be accessed in their volume. The range of applications is huge and spreads from nuclear spectroscopy to the characterization of metal extrusion under industrial conditions. This article compiles an overview over the most common instrumental diffraction techniques.Modern two-dimensional detectors are used to obtain rapid overviews in reciprocal space. For example, diffuse scattering investigations benefit from the very flat Ewald sphere as compared to low energies, which allow mapping of several Brillouin zones within one single shot. Diffraction profiles from liquids or amorphous materials can be recorded easily. For materials science purposes, whole sets of Debye-Scherrer rings are registered onto the detector, their diameters and eccentricities or their intensity distribution along the rings relating to anisotropic strain or texture measurements, respectively. At this point we stress the resolution of this technique which has to be carefully taken into account when working on a second generation synchrotron source.Energy-dispersive studies of local residual strain can be studied by a dedicated three-circle diffractometer which allows accurately to adjust the scattering angle from a defined gauge volume.Triple axis diffractometry and reciprocal space mapping is introduced and can be employed for highest resolution purposes on single crystal characterization, even under heavy and dense sample environments. Thus, the perfection of single crystals can be mapped and strain fields and superstructures as introduced by the modulation from ultrasonic waves into crystals or epitaxially grown Si/Ge layers can be investigated in detail. Phase transitions as magnetic ordering can be studied directly or through its coupling to the crystal lattice. Time resolved studies are performed stroboscopically from a sub-nanosecond to a second time scale.The combination of these techniques is a strong issue for the construction and development of future instruments.

No abstract

The HEMS beamline at PETRA III has a main energy of 120 keV, is tunable in the range 30-200 keV, and optimized for sub-micrometer focusing with Compound Refractive Lenses. Design, construction, and main funding was the responsibility of the Helmholtz-Zentrum Geesthacht, HZG. Approximately 70 % of the beamtime is dedicated to Materials Research, the rest reserved for “general physics” experiments covered by DESY, Hamburg. The beamline P07 in sector 5 consists of an undulator source optimized for high energies, a white beam optics hutch, an in-house test facility and three independent experimental hutches, plus additional set-up and storage space for long-term experiments. HEMS has partly been operational since summer 2010. First experiments are introduced coming from (a) fundamental research for the investigation of the relation between macroscopic and micro-structural properties of polycrystalline materials, grain-grain-interactions, recrystallisation processes, and the development of new & smart materials or processes; (b) applied research for manufacturing process optimization benefitting from the high flux in combination with ultra-fast detector systems allowing complex and highly dynamic in-situ studies of microstructural transformations, e.g. in-situ friction stir welding; (c) experiments targeting the industrial user community.

We report on an effect of reduced dimensionality on the magnetotransport in cobalt layers sandwiched by platinum. In a current in-plane geometry it is found that the resistivity depends on the magnetization orientation within the plane perpendicular to the current direction. The resistivity shows a symmetry adapted cos(2) dependence on the angle to the surface normal, with the maximum along the surface normal. The Co thickness dependence of the effect in Pt/Co/Pt sandwiches clearly points out that the mechanism behind this effect originates at the Co/Pt interfaces and is disparate to the texture induced geometrical size effect.

Muscle morphology, signal intensity, and volume is relatively uniform among healthy young women.