The most important issue when developing the machine technology of cabbage harvesting is to protect the heads from mechanical damage. In this regard, the article describes a new technology for harvesting cabbage based on a prototype developed by the authors of a multivariate cabbage harvester. This technology of cabbage machine harvesting differs from the known gentle mode of stacking heads in containers on a low-frame trailer accompanying the harvesting unit. The authors first simulated the workflow of this technology using the queuing theory. As a result, a quantitative relationship between the performance indicators of the cabbage harvesting process and the structural and technological parameters of the machine in the studied variant was established. On its basis, rational values of parameters of the machine were defined: the number of jobs at the completion table, the longitudinal conveyor and on the site of the low-frame trailer, respectively, n1 = 2, n2 = 4, and n3 = 4; the length of the conveyor-cutter and the longitudinal conveyor, respectively, was 2.8 and 4 m.
Currently used potato harvesters with bar and screening screening devices, based on intense impact on the soil layer, significantly injure the potato tubers in the process of separation from the soil. In addition, structural elements operating in an abrasive environment without lubrication wear out intensively, prone to sticking to plant residues. In this regard, proposed and justified theoretically constructive-technological scheme of the new potato harvester, containing a frame with support wheels, a sieve consisting of longitudinal bars, kinematically connected by a rear part by a drive shaft by means of eccentric pins, located in antiphase with respect to each other, mounted by the front part with the guide on the axis with rollers and fixed rigidly through one to the shares, as well as from the beaters located in the slots between the rods. The paper analyzes the kinematic mode of the machine. As a result, it was established that the layer of soil on the separating rods is cyclically subjected to bending, compression and stretching. This contributes to its intensive crumbling and screening between the rods. For more efficient operation of the machine, it is recommended to adopt the angular velocity of rotation of the eccentric shaft of the separating device ω1 = 10...15 s-1.
BACKGROUND:The 15-20% of the product of machine harvesting of cabbage are cabbage leaves and the remains of weeds. Known devices installed at cabbage harvesters for separating associated waste products do not operate with sufficient quality. In this regard, a new separating device has been developed. AIMS:Assessment of the effectiveness of operation of a new separating device in assembly with a cabbage harvester in laboratory conditions. MATERIALS AND METHODS:In order to carry out the research, a separating device made in the form of a rotating roller is in-stalled above the web of the conveyor-cutter of the experimental cabbage harvester with a gap be-hind the unloading zone of the cutting device at the angle to the direction of the cabbage flow. Under laboratory conditions, the working process of the device was studied by supplying a mass of cabbage (heads and cabbage leaves) to the rotating roller, driving the blocks of the cutting device and the conveyor-cutter of the cabbage harvester from the electric motor. RESULT:As a result of the experiments carried out under the PFE-22program, the dependence of the opera-tion quality (the degree of separation of cabbage leaves from heads) on the leaves percentage and the size-mass characteristics of heads in the flow was studied. At the same time, it was found that the developed device as a whole operates steadily, the process of separation of associated waste products proceeds most successfully with small and medium sizes of heads and a lower content of cabbage leaves in the flow. CONCLUSIONS:The developed device separates the associated waste products from heads of cabbage sufficiently in the entire range of their content in the flow from 10 to 20%, which is typical for real field conditions.
When harvesting cabbage by machine, the heads of cabbage are severely injured. Mechanically damaged heads of cabbage are poorly stored. Therefore, the machine technology of cabbage harvesting should provide protection of heads of cabbage from mechanical damage. The purpose of the research is to study the qualitative indicators of the operation of a multivariate cabbage harvester with various harvesting technological schemes. The considered technological schemes for harvesting cabbage include: careful shipment of heads in bulk of a universal vehicle (Scheme 1); careful point shipment of heads of cabbage into containers installed in the back of a vehicle (diagram 2); shipment of heads of cabbage on a flexible flooring installed in the vehicle, with their subsequent careful transfer to containers manually (Scheme 3); stowing heads of cabbage into containers on an accompanying trailer manually (Scheme 4). During the production check, under conditions typical for the main regions of mass marketable production of cabbage, the multivariate cabbage harvester steadily performed the technological process. At the same time, its quality indicators met the established agrotechnical requirements. Combine operation according to schemes 3 and 4 ensured the preservation of product quality to the maximum extent: damage to heads of cabbage did not exceed 5 ... 6%, the completeness of cabbage leaves removal was 95 ... 100%. Therefore, its use according to schemes 1 and 2 is recommended mainly when harvesting cabbage for short-term and medium-term storage, according to schemes 3 and 4 - when harvesting heads of cabbage intended for long-term storage
During the traditional mechanized harvesting of cabbage the heads are severely injured. In this regard, the purpose of research is to provide scientific justification for the new technology and devices for machine harvesting cabbage in a sparing mode. Using mathematical modeling, new methods of cabbage harvesting are justified, which provide for a gentle mode of shipment of heads by a combine harvester using a special device, first on a flexible flooring, and then carefully transferring them manually into containers. Thus, the methods of reducing the damage to cabbage heads during machine cleaning are formulated, and the nature of the influence of the main parameters of the proposed devices on the quality of the working process is analytically revealed. As a result, the rational parameters of the devices were determined: the departure of the loading zone of the tray Δ=0.100-0.150 m with its Flexural stiffness EI=16-20 H.m2 , the height difference of the edges of the flexible flooring h=0.25 m. The production test established the consistency of the proposed new technology of machine harvesting of cabbage and the possibility of reducing the damage to the heads to a level not exceeding 5-7% of the total mass of products.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.