For the creation of novel coherent sub-THz sources excited by electron beams there is a requirement to manufacture intricate periodic structures to produce and radiate electromagnetic fields. The specification and the measured performance is reported of a periodic structure constructed by additive manufacturing and used successfully in an electron beam driven sub-THz radiation source. Additive manufacturing, or “3D printing”, is promising to be quick and cost-effective for prototyping these periodic structures
The Strathprints institutional repository (https://strathprints.strath.ac.uk) is a digital archive of University of Strathclyde research outputs. It has been developed to disseminate open access research outputs, expose data about those outputs, and enable the management and persistent access to Strathclyde's intellectual output.
This version is available at https://strathprints.strath.ac.uk/62807/ Strathprints is designed to allow users to access the research output of the University of Strathclyde. Unless otherwise explicitly stated on the manuscript, Copyright © and Moral Rights for the papers on this site are retained by the individual authors and/or other copyright owners. Please check the manuscript for details of any other licences that may have been applied. You may not engage in further distribution of the material for any profitmaking activities or any commercial gain. You may freely distribute both the url (https://strathprints.strath.ac.uk/) and the content of this paper for research or private study, educational, or not-for-profit purposes without prior permission or charge.Any correspondence concerning this service should be sent to the Strathprints administrator: strathprints@strath.ac.ukThe Strathprints institutional repository (https://strathprints.strath.ac.uk) is a digital archive of University of Strathclyde research outputs. It has been developed to disseminate open access research outputs, expose data about those outputs, and enable the management and persistent access to Strathclyde's intellectual output.Author Accepted Manuscript: Paper presented at IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies (UCMMT), 5-7 September 2016, Qingdao, China. Accepted paper (3 pages) published online by IEEE Xplore, 09 March 2017. doi: 10.1109/UCMMT.2016 1 Abstract-To rapidly prototype novel mm-wave and THz sources there is a requirement to create intricate structures to produce and radiate electromagnetic fields. The motivation for this work is to create improved electron-beam-driven, vacuum electronic mm-wave and sub-THz sources by exploiting dispersion engineering. Although such structures can be manufactured by other techniques, additive manufacturing has proven to be quick, reliable and cost-effective. This research is allowing the prototyping of novel mm-wave and sub-THz coherent sources.
Abstract-Periodic structures used for high power millimetre and sub-millimetre sources that implement relativistic beamwave interactions have historically involved the implantation of a dielectric layer around the inner wall of the interaction region or a periodic corrugated structure that serves to reduce the velocity of an internal electromagnetic wave. Moving towards the THz regime, the physical dimensions required to manufacture such a cavity become prohibitively difficult. Ongoing attempts to develop manufacturing processes that provide higher resolution have resulted in a number of viable techniques. Additive Manufacturing or 3D printing offers the possibility of producing components on this scale quickly and efficiently. Here 0.1, 0.4 and 1 THz periodic structures are realised using high resolution (16 micron) 3D printing technology.
Structures based on a periodic surface lattice (PSL) of planar geometry have been studied. It is shown that volume and surface fields can couple to form a cavity eigenmode, demonstrating the potential for novel mm-wave sources when combined in appropriate configurations with an electron beam
This version is available at https://strathprints.strath.ac.uk/62835/ Strathprints is designed to allow users to access the research output of the University of Strathclyde. Unless otherwise explicitly stated on the manuscript, Copyright © and Moral Rights for the papers on this site are retained by the individual authors and/or other copyright owners. Please check the manuscript for details of any other licences that may have been applied. You may not engage in further distribution of the material for any profitmaking activities or any commercial gain. You may freely distribute both the url (https://strathprints.strath.ac.uk/) and the content of this paper for research or private study, educational, or not-for-profit purposes without prior permission or charge.Any correspondence concerning this service should be sent to the Strathprints administrator: strathprints@strath.ac.ukThe Strathprints institutional repository (https://strathprints.strath.ac.uk) is a digital archive of University of Strathclyde research outputs. It has been developed to disseminate open access research outputs, expose data about those outputs, and enable the management and persistent access to Strathclyde's intellectual output.Author Accepted Manuscript: Paper accepted by IEEE 10th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies (UCMMT), 11-13 September 2016, Liverpool, UK. Published online by IEEE Xplore, 16 October 2017.1 Abstract-Experimental results from the operation of an electron beam driven, mm-wave, vacuum electronic source are reported. The aim of this work is to create improved electronbeam-driven, vacuum electronic mm-wave and sub-THz sources by exploiting dispersion-engineering. Dispersion-engineered structures can be manufactured by several techniques and in this work additive manufacturing has proven to be quick, reliable and cost-effective.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.