a b s t r a c tA new set of failure criteria to predict composite failure in single lap bolted joints is proposed. The pres ent failure criteria are an extension of Chang Lessard criteria considering a three dimensional stress field and including out of plane failure modes. The advantage with respect to other three dimensional failure criteria is the consideration of non linear shear stress strain relationship. The failure criteria were imple mented in a finite element model and validated through comparison with experiments in literature. Stresses were calculated by a non linear finite element model developed in ABAQUS/Standard which con siders material and geometric nonlinearities. A progressive damage model was implemented in a USDFLD subroutine. The model predicted the effect of secondary bending and tightening torque showing an excel lent agreement with experimental results. Moreover, results were compared with those reported in lit erature using Hashin failure criteria. In addition, a parametric study was carried out to analyse the influence of friction coefficient and tightening torque.
Numerical models of impact on aramid composite plates and combat helmet were developed. • Experimental tests were carried out ac cording to standards used by manufac turers. • Good accuracy between predictions and experiments was observed proving the ability of the models developed as a de sign tool
Machining processes of composites are common operations in industry involving elevated risk of damage generation in the workpiece. Long fiber reinforced polymer composites used in high-responsibility applications require safety machining operations guaranteeing workpiece integrity. Modeling techniques would help in the improvement of machining processes definition; however, they are still poorly developed for composites. The aim of this paper is advancing in the prediction of damage mechanisms involved during cutting, including out-of-plane failure causing delamination. Only few works have focused on three-dimensional simulation of cutting; however, this approach is required for accurate reproduction of the complex geometries of tool and workpiece during cutting processes. On the other hand, cohesive interactions have proved its ability to simulate out-of-plane failure of composites under dynamic loads, as impact events. However, this interlaminar interaction has not been used up to date to model out-of-plane failure induced during chip removal. In this paper, both a classical damage model and cohesive interactions are implemented in a three-dimensional model based on finite elements, in order to analyze intralaminar and interlaminar damage generation in the simplified case of orthogonal cutting of carbon LFRP composite. More realistic damage predictions using cohesive interactions were observed. The strong influence of the stacking sequence on interlaminar damage has been demonstrated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.