The balloon-borne instrument TELIS (TErahertz and submillimetre LImb Sounder) is a three-channel superconducting heterodyne spectrometer for atmospheric research use. It detects spectral emission lines of stratospheric trace gases that have their rotational transitions at THz frequencies. One of the channels is based on the superconducting integrated receiver (SIR) technology. We demonstrate for the first time the capabilities of the SIR technology for heterodyne spectroscopy in general, and atmospheric limb sounding in particular. We also show that the application of SIR technology is not limited to laboratory environments, but that it is well suited for remote operation under harsh environmental conditions. Within a SIR the main components needed for a superconducting heterodyne receiver such as a superconductor-insulator-superconductor (SIS) mixer with a quasi-optical antenna, a flux-flow oscillator (FFO) as the local oscillator, and a harmonic mixer to phase lock the FFO are integrated on a single chip. Light weight and low power consumption combined with broadband operation and nearly quantum limited sensitivity make the SIR a perfect candidate for use in future airborne and space-borne missions. The noise temperature of the SIR was measured to be as low as 120 K, with an intermediate frequency band of 4-8 GHz in double-sideband operation. The spectral resolution is well below 1 MHz, confirmed by our measurements. Remote control of the SIR under flight conditions has been demonstrated in a successful balloon flight in Kiruna, Sweden. The sensor and instrument design are presented, as well as the preliminary science results from the first flight.
A number of new fabrication techniques are developed and optimized in order to fit the requirements of contemporary superconducting electronics. To achieve ultimate performance of integrated submm receivers with operational frequency of 1 THz, tunnel junctions with AlN tunnel barrier having a value as low as 1 m 2 have been developed. High quality characteristics of Nb/AlN/Nb tunnel junctions with = 16 and = 10 m 2 have been demonstrated. Electron Beam Lithography (EBL) in combination with Chemical Mechanical Polishing (CMP) has been incorporated to produce Nb/AlN/Nb junctions with 0.03 m 2 area. A new approach to get overdamped Nb/AlO /Nb tunnel junction has been proposed and realized. The dependencies of the main parameters of novel junctions on the currents density and circuits geometry have been studied. These junctions may have a good potential in Josephson Junction Arrays and Single-Flux-Quantum applications (RSFQ).
Context. We describe the new SEPIA (Swedish-ESO PI Instrument for APEX) receiver, which was designed and built by GARD OSO in collaboration with ESO. It was installed and commissioned at the APEX telescope during 2015 with an ALMA Band 5 receiver channel and updated with a new frequency channel (ALMA Band 9) in February 2016. Aims. This manuscript provides a reference for observers who use the SEPIA receiver in terms of the hardware description, optics and performance as well as the commissioning results. Methods. Out of three available receiver cartridge positions in SEPIA, the two current frequency channels, corresponding to ALMA Band 5, the RF band 158-211 GHz, and Band 9, the RF band 600-722 GHz, provide state-of-the-art dual polarization receivers. The Band 5 frequency channel uses 2SB SIS mixers with an average SSB noise temperature around 45 K with IF (intermediate frequency) band 4-8 GHz for each sideband providing total 4 × 4 GHz IF band. The Band 9 frequency channel uses DSB SIS mixers with a noise temperature of 75-125 K with IF band 4-12 GHz for each polarization.Results. Both current SEPIA receiver channels are available to all APEX observers.
The results of linewidth measurements on flux-flow oscillators (FFOs) of a new design with improved parameters are presented. Extensive measurements of the dependence of the free-running FFO linewidth on the differential resistances associated both with the bias current and the control-line current (applied magnetic field) are taken. A profile of the FFO radiation line is measured in different regimes of FFO operation and compared to the theoretical models. A Lorentzian shape of the FFO line is observed both at Fiske steps (FSs) in the resonant regime and on the flux-flow step (FFS) at high voltages. A phenomenological model of the FFO linewidth taking into account all known noise sources (both internal and external) is used to explain the FFO linewidth dependence on the experimental parameters. Finally, we discuss the feasibility of using an electronic phase-locking loop (PLL) over the entire FFO operational frequency band.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.